Sargent Control Problem reboot (1 Viewer)

Apr 2, 2021
72
215
Perthshire
Funster No
80,132
MH
PVC
Exp
Since 2020
Hi, My Sargent control panel has an error message saying "please reboot". Screen says - EC480-CP R24 Error - Please Reboot.
We are also connected to mains on the site we are on but there is no mains power to the sockets, while there was before the error message appeared.
I can't find any way to reboot and have tried switching the Sargent 500 unit on and off but no success.
Any suggestions much appreciated.
Thanks
Auslan
 
OP
OP
Gonestravaiging
Apr 2, 2021
72
215
Perthshire
Funster No
80,132
MH
PVC
Exp
Since 2020
Hi, yes tried that without success. Everything is working but the message is still there and I can't check info on the control panel.

Subscribers  do not see these advertisements

 
Upvote 0
Oct 10, 2018
1,959
1,099
Bracklesham Bay, West Sussex
Funster No
56,646
MH
PVC
Exp
Since 2005
If you can get to the back of the control panel you could try disconnecting its multi-plug for a while . The resources section on the top line (next to subscriptions) has the information about removing the panel from a EC480 on page 3
 
Last edited:
Upvote 0
Mar 9, 2019
298
357
Scotland
Funster No
58,985
MH
AutoTrail Dakota ’14
Exp
Newbie
The EC500 manual has this snippet in the Troubleshooting section.

Control panel software may have crashed. Reboot control panel by turning off the PSU isolate switch. Wait 30 seconds then turn the switch back on.

If that doesn’t work then give Sargent a call - they are usually very helpful.
 
Upvote 0

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Funsters who are viewing this thread

Back
Top