Remove fixed table

[Take2]

Hi fellow funsters, can anyone help me to figure out how to remove the large table in my Dethleffs.
It has one circular telescopic pedestal and is able to move, up/down, fwd/back and left/right.
Has x6 4mm screws around its base and it’s all manual, no power

If it was able to rotate for better access into the wall cupboards I’d probably not need to take it out but I’ve tried plus dealer said it’s not the rotating kind.
Cheers
Ray

 

[irnbru]

A photo would be useful.

 

[Take2]

Photo attached thanks

 

[Take2]

You can see the two clamps. One to clamp the elevation and the other for tooing and froing
The 6 screws around the base into the floor seem to have no effect

 

[daveinspain]

In my Rapido I´ve got a somewhat similar table, except mine rotates as well. The six screws round the base release the whole assembly, it might need a good tug, but that´s how mine came out when I changed the flooring.

^{_{Subscribers  do not see these advertisements}}

 

[AG 2602]

In my Rapido I´ve got a somewhat similar table, except mine rotates as well. The six screws round the base release the whole assembly, it might need a good tug, but that´s how mine came out when I changed the flooring.

Yes ours was the same in our Pilote and a pretty simple job (even for me)!
Replaced with Lagun leg and smaller table top. Fully adjustable and you can easily push it any direction. Best modification we made in MH

 

[Take2]

Thanks, I’ll have another try.

Another task I’m undertaking before we set off for France next month is,
I want to fit a camera setup in the cab to act as dash cam and internal cab cam.
Been looking at ones to fit onto the mirror with decent pixel quality fwd and back.
Didn’t think one on the screen would work well with the blinds. Also the mirror seems tight to remove and fit a screen one in its place

 

[daveinspain]

If you want answers re the camera, you would be better to start another thread with that heading. I´m not familiar with mirror monitors, so can´t help you with that.