Rear view camera through the wall fitting PART II (1 Viewer)

[Techno]

Continued from Broken Link Removed
Having carefully measured the centre line I used the 28mm hole cutter supplied with the camera which makes a clean job in the GRP

Internal cable protection

view with bike rack folded down

 

[Mike B]

Now in the download section.

 

[mentaliss]

rear view camera

next time your Council friendly dust truck is outside your house take a good look at it these vehicles they are all fitted with bullet type rear, side and front view cameras plus the reverse warning siren plus multi screen monitor they have been using these systems since Blair gave Brussels the nod to implement another compliance that this country has to adhere too

^{_{Subscribers  do not see these advertisements}}

 

[Techno]

Continued.......

This was how it was apart from it had turned considerably rusty and the reverse camera was no good with bikes onboard.

and now with two seperate 120 degree cameras

Unfortunately monitors don't photograph very well but just to give you the viewpoints ( actual picture is very good )
Top camera

Bottom

I've contacted the seller of the top one about getting me a 90 degree version which will be more suited to rear view rather than reversing.

 

[jhorsf]

Once again nice photographs Andy thank you for taking the time and trouble :thumb:

 

[Techno]

Thanks John
Seller is getting me a 90 degree unit (delivery two weeks) £33
Can also get me 60 degree but I'll try this first.

^{_{Subscribers  do not see these advertisements}}

 

[Ridgeway]

Andy was it a simple case of connecting in the new camera on a spare AV input ? I assume you have 2 inputs and 1 already in use with the top camera ?

I have a similar issue and my top factory fitted camera is good for reversing but nothing else even after playing about with the angle, this idea may solve it for me.

Also is your top camera activated when reverse gear is selected or is it on all the time ?

 

[Techno]

I originally had a dual camera with two seperate cables to my monitor so I have only substituted the dual for two singles.
Rear view on AV1 reverse on AV2
The cameras are fed by the monitor and come on with the ignition, I manually select AV1 or AV2

 

[Ridgeway]

OK thanks.

So you avoided the nice cable run task from back to the front, the part I love most

^{_{Subscribers  do not see these advertisements}}

 

[Techno]

OK thanks.

So you avoided the nice cable run task from back to the front, the part I love most

No I had to do it in the first place :thumb: