Pump replacement

Joined
Mar 14, 2020
Posts
916
Likes collected
935
Location
Isle of Man
Funster No
69,394
MH
Autotrail Cheyenne
Exp
Since 2015, still learning
So which pump would you replace this with?
1058B260-4693-455E-B2C0-DBAD7BA9EED6.png

This…

or this


any advice appreciated,
thanks,
Cush
 
Always been happy with Shurflo. Don't go too high on psi though. Expansion vessel worth adding too.
Sorry Jev88 just found your reply. Thanks for the advice 👍👍
 
Agree Shureflo, I think your current pump has a seperate pressure switch if so you will need to remove it.
 
Agree Shureflo, I think your current pump has a seperate pressure switch if so you will need to remove it.
Thanks for the info Lenny HB any idea where it’s located?

Subscribers  do not see these advertisements

 
Thanks for the info Lenny HB any idea where it’s located?
I can't find any info on that pump but it doesn't look like it has a pressure switch built in. If it has just follow the wires from the pump that will find it.
Or you may have micro switched taps identified by two wires coming out of the bottom of the tap, If you have them they will need disconnecting if fitting a Shureflo.
You will then need to fit a new positive supply to the pump.
 
Thanks again Lenny HB I’m pretty sure it’s not microswitched. Will contact whale direct just to check. Leaning towards the shurflo.
 
I had to replace my Sureflo last year and after searching for the best deal bought from my local mh dealer. Discovered the next day that Halfords sold them cheapest at the time. So if you decide Sureflo it's worth a look.
 
Lenny HB if changing from microswitch to pressure sensing pump why not just connect the wires at one tap together?

Subscribers  do not see these advertisements

 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Back
Top