New spring via a breakers yard? (1 Viewer)

[colyboy]

Have been looking for a spare spring for my habitation door on my 2016 Hymer Tramp CL588. Local suppliers state that I have to buy a complete lock!

Any one know of any breakers who may be help me out with spring or complete lock.

Hope someone may have some suggestions.

Colyboy

 

[WillH]

Buy a box of springs from Ebay.

 

[Hettie's Crew]

Searching eBay is a right pain but it’s paid off loads of times for me, don’t just think lock spring, they may be used in other applications.

^{_{Subscribers  do not see these advertisements}}

 

[ctc]

Buy a box of springs from Ebay.

Best, cheapest and easiest.

 

[jockaneezer]

Make your own with a bit of piano wire (available online) Check out McMaster Carr's catalogue for a similar one and use the spec they provide ?

 

[Euphony]

Input into google the length and diameter of the spring plus the thickness of the wire it’s made from (a Vernier gauge will tell you) and you’ll get suppliers. It’ll be just pennies. CORRECTION: it’ll be a couple of quid.

^{_{Subscribers  do not see these advertisements}}

 

[Vipar]

Boing said zebbidy

 

[tonka]

I have seen posts on here where people have made springs in similar circumstances. May be worth doing a search.
Why not post a pic of the spring and sizes, we may have a secret spring expert Quite a few companies here in the Black country..

 

[colyboy]

The spring I am looking for!

^{_{Subscribers  do not see these advertisements}}

 

[mitzimad]

looks like a peg spring with a bit cut of

 

[Taran_Las]

I bought some piano wire and with the help of some pliers, some patience and the old spring formed a replacement. It was still OK 5 years later when I sold the van.

 

[TheBig1]

looks like a peg spring with a bit cut of

they are bigger than a peg spring but similar. easy enough to copy with spring wire

^{_{Subscribers  do not see these advertisements}}

 

[Diabalo]

As said above just search for spring wire on Ebay and make your own. Not too difficult to form the large circle part around a piece of pipe of the correct diameter, then use pliers or a vice to bend the right angles on the 2 legs.

 

[Hettie's Crew]

Wire Diameter 0.4/0.5/0.8-4.0mm 304 Stainless Steel Spring Wire DIY Accessories | eBay

Material: 304 Stainless steel. Note: The length is not continuous.

rover.ebay.com

 

[Tezza]

Could try these guys in South East Wales, they used to break up vans and caravans

The Caravan Repair Centre
UNIT 3A GILCHRIST THOMAS IND.E
BLAENAVON
TORFAEN
NP4 9RL

Telephone: 01495 792700
info@caravanbreakers.net

^{_{Subscribers  do not see these advertisements}}

 

[The Dudess]

I reckon Mrsambulancekidd could make you one (if you ask very nicely) with the tool she uses for her jewellery.

 

[Mrsambulancekidd]

I reckon Mrsambulancekidd could make you one (if you ask very nicely) with the tool she uses for her jewellery.

Yea corse I can, do ya want gem stones on it......

 

[colyboy]

Thanks everybody for info I will be following up many of leads in the next days. Thanks

^{_{Subscribers  do not see these advertisements}}

 

[Mrsambulancekidd]

Consider it fixed, here is your solution...… The Dudess is paying the P&P.....

 

[The Dudess]

View attachment 342909Consider it fixed, here is your solution...… The Dudess is paying the P&P.....

Oh no she's not!!! But looking forward to my commission cheque when (if) colyboy pays you.

 

[PeteH]

On the face of it, it does not look to hard to replicate if you have the original as a pattern.

"piano wire" is not hard to come by?.

^{_{Subscribers  do not see these advertisements}}

 

[jockaneezer]

Just as an aside, why not straighten that coil that's broken and bend it to shape. Might work or might snap but may get you going again until you sort a proper fix ?

 

[Jaws]

Any model shop will carry spring wire.. and although fiddly making one is not that hard

 

[Spriddler]

Any one know of any breakers who may be help me out with spring or complete lock.

Why not just Google 'Caravan breakers'? There were loads of them when I was looking for a replacement window for my m/h.
Then take the old one as a pattern or phone with the lock details. It'll only cost a couple of quid to post one to you.

^{_{Subscribers  do not see these advertisements}}

 

[March Hare]

Have been looking for a spare spring for my habitation door on my 2016 Hymer Tramp CL588. Local suppliers state that I have to buy a complete lock!

Any one know of any breakers who may be help me out with spring or complete lock.

Hope someone may have some suggestions.

Colyboy

Hi colyboy! Apologies for digging up an old thread from 2019, but we're currently in the same position that you were in with a broken Hymer Habitation Door lock. We had the whole mechanism replaced in July and the new one has broken already! ☹

I just wondered how you had managed to fix the lock - did you make your own replacement spring, or did you manage to find a stockist?

Many thanks in advance!

 

[colyboy]

Yes I did get a replacement spring about £1.95 ONLY plus postage. This was a genuine Hymer spare.

came from Travelworld Tel: 01785 878787

my contact was with, samanther.lowbridge@motorhomes.co.uk, she was more than helpful. Try her on the email address.

hope this helps.

Colyboy

 

[gus-lopez]

We had the whole mechanism replaced in July and the new one has broken already!

That would be under guarantee then

^{_{Subscribers  do not see these advertisements}}

 

[March Hare]

Yes I did get a replacement spring about £1.95 ONLY plus postage. This was a genuine Hymer spare.

came from Travelworld Tel: 01785 878787

my contact was with, samanther.lowbridge@motorhomes.co.uk, she was more than helpful. Try her on the email address.

hope this helps.

Colyboy

Wow Colyboy, that's fantastic, thanks so much for this info! We are going to call into Travelworld tomorrow as we'll be heading back up from the SW to the NE!

As a bit of a (positive) update, we decided to take a look at the insides of the lock mechanism thus morning and carefully removed the plastic cover. In actual fact, all the springs appearef to be located correctly and none appeared to have been dislodged....

However, it gave us the chance to look at the catch and we clicked it back into place / reset it's location, and then gave it another try, and bingo it was working again!! We were so pleased because we're off again next week for our next trip, so the thought of having the habitation door out of commission wasn't too promising, so a huge sigh of relief all around!

However, now we've taken a good look at the insides of the lock, I think we would have confidence changing the spring if necessary in the future, so we'll stop by Travelworld tomorrow to buy a couple of spare springs to put into the toolbox!

Thanks again for your fantastic reply with all the information!

 

[March Hare]

That would be under guarantee then

Hi Gus-Lopez! Thanks very much for your reply! It hadn't occurred to us that the new lock would be covered by a guarantee, so thanks very much for suggesting that!

As per my update above, we've had a look at the insides of the lock today and reset it and all appears to be ok now, which we're really pleased about! We're going to stop by tomorrow at Travelworld to get a couple of spare springs in case we need then in the future.

Thanks again for taking the time to reply!!