SOLD Myford ML7 lathe. (1 Viewer)

[Jaws]

Myford ML7 lathe.
It is in full working order mounted on a Myford plinth
Reversable
Three speed
Oilers
auto feed
It had new belt 3 years ago ( when I retired )
It has a full set of screw cutting gears
Face plate
Large three jaw chuck
Small three jaw chuck
Heavy duty deep three jaw chuck
4 way tool post
For the last 16 years it has been used to work plastics and ally

With the extra chucks £450
Without the extra chucks £400

 

[7Hvn]

I maybe interested. Any chance in some more pictures and some dimensions? Namely the overall dimensions of the lathe and plinth (if repeatable) and the swing and max distance between centers.

Cheers

 

[Jaws]

20" centres
Centre to bed 3.5" ( Hence ML7, is can take material up to 7" O.D )
Plinth 38" X 13"

^{_{Subscribers  do not see these advertisements}}

 

[27 TUG]

Hi we’re are you base Andy

 

[Ivory55]

Last time I saw something like that was at school in the technical block, when we made centre punch etc.

 

[busby]

Thats a blast from the past,,,They used to manufacture those in my old town,,,Beeston notts,,BUSBY,,

^{_{Subscribers  do not see these advertisements}}

 

[two]

What's the weight (I need to consider my payload)?

 

[Mr B]

I’d have got a right bollocking for leaving the key in Chuck. Nice oil drip feeders for the bearings. Nice though.

 

[7Hvn]

At school when you couldn't find the chuck key the first place to look was straight up. 9 times out of 10 it was planted firmly into the polystyrene roof

^{_{Subscribers  do not see these advertisements}}

 

[Jaws]

What's the weight (I need to consider my payload)?

I have no idea... But 'heavy' is a word I would use !
Proly about 120 to 140 kilos

I’d have got a right bollocking for leaving the key in Chuck. Nice oil drip feeders for the bearings. Nice though.

Oh I agree... But as it was unplugged, on rollers etc, I took a chance and left it there !

 

[olley]

You could strip it, when I moved my lathe which is similar to a Myford, we stripped it down to the bed, still took two of us to lift just that, so I would think 120-140kg is about right.

 

[two]

You could strip it, when I moved my lathe which is similar to a Myford, we stripped it down to the bed, still took two of us to lift just that, so I would think 120-140kg is about right.

Two strong men, I should think. Or four old codgers, and another to make the tea.

^{_{Subscribers  do not see these advertisements}}

 

[mfw]

Good job it is not a vehicle they have got better - machinery has got cheaper but matures with age - and at that age is built to last

 

[olley]

Machinery has got easier to use with DRO's and CNC but better? Mind you I am thinking about a DRO on my little lathe, don't need it but want it.

 

[Jaws]

Two strong men, I should think. Or four old codgers, and another to make the tea.

Blimey ! What does that make me then ? I move it around on my own !

^{_{Subscribers  do not see these advertisements}}

 

[Two on Tour]

Hold on, don't try to make out your superman as you did say it was on rollers.

 

[Roger20]

Interested @Jaws but where are you based?

 

[Jaws]

Interested @Jaws but where are you based?

I am afraid Mark ( @7Hvn ) is probably going to have it Roger... Coming down from Yorkshire on Sunday morning

But in answer to your question, I am in Thetford

^{_{Subscribers  do not see these advertisements}}

 

[Roger20]

Thanks anyway- might have been too far

 

[3Windo]

Did this sell or still available?

 

[Jaws]

Did this sell or still available?

Sorry @3Windo but yes, Mark collected it a couple of weeks ago

^{_{Subscribers  do not see these advertisements}}