Rob and Val
Free Member
- Oct 17, 2010
- 1,906
- 2,677
- Funster No
- 14,142
- MH
- Talbot Compass Calypso
- Exp
- Since July 2010
Thanks for that, Laura. Fingers crossed!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I may have a spare board. If you decide you need one, I'll check to see if it's the right one.
Subscribers do not see these advertisements
Havnt read all this thread, but have you contacted the makers, by all accounts they are very accomadating and only at burton.I need to source a new PCB, the chap i sent it to dose not repair the model !!!
I have started checking ebay, i have found one in completed listings so i have message them to see if they still have it.
I have also messaged Brownhills to see if they have the part.
Would it be just as easy to swap the hole boiler for a newer model?
Any help welcome xxxx
Subscribers do not see these advertisements
Beginning to look like a new one, then I'm afraid,you have the danger now of shelling out then something else going.Truma can not help
Subscribers do not see these advertisements
Laura, have you tried these people?Truma can not help
Laura, have you tried these people?
Good luck,
Jock.
Subscribers do not see these advertisements
Subscribers do not see these advertisements
When we had a problem with our step, it turned out to be dirty earth connections under the van near the step, just cleaned them off, not had a problem since worth trying.Update - I have received the new PCB today, fitted it and now we are fully up and running, hot water and got air
Now time to apply my tiny bit of spair time to fixing the step