How big is an 11Kg Gaslow bottle? (1 Viewer)

[Geomore]

The website gives 530mm to top of filler elbow x 304mm diameter. A tape measure and tongue at the right angle suggests this is going to be quite tight against the regulator/crash sensor assuming its a simple "cylinder" shape which it's not. From bottle restraint to regulator, that would make almost exactly touch, and I'd rather have a nice gap. Does anyone know at what height from the floor the top of the wide part of the cylinder starts to curve in? I'd like to change my 6kg for an 11kg, and rather not move the regulator, or the Fill point which is blocking the second bottle location.

Also, I'd be interested in anyone in the south that has a 11kg for sale, or part ex my 6kg one!

 

[Vanderek]

The vertical side is 400mm then it starts to round in.

 

[Lenny HB]

The regulator needs to be higher than the outlet on the cylinder.

^{_{Subscribers  do not see these advertisements}}

 

[Geomore]

The vertical side is 400mm then it starts to round in.View attachment 490755

Thank you, this is exactly what i needed to know. 400mm brings it to just below the crash valve, do it will fit nicely.

The outlet height of the cylinder measures level with the bottom of the regulator, watch is fed from the top, so that should be fine. I think the locker is designed specifically for conventional 11kg bottles, I wanted to be sure that was still the case for a gaslow one.