Honda SH125 measurement please

[csd4t]

If anyone with the above could measure the maximum width at thigh level (from the end of the center stand to the outer of the exhaust) please.
I recently purchased an SH300 but its too big to fit in the van (would be up for a deal if anyone wants a 300) so I hope the 125 will be a bit slimmer.

 

[Steve and Denise]

I think there was a 125 for sale on here only this week but I can’t seem to find it now. I have been looking at new 300 i as as a couple of good deals about.

 

[funflair]

Airbox to exhaust is the widest point at 550mm.

 

[Steve and Denise]

If anyone with the above could measure the maximum width at thigh level (from the end of the center stand to the outer of the exhaust) please.
I recently purchased an SH300 but its too big to fit in the van (would be up for a deal if anyone wants a 300) so I hope the 125 will be a bit slimmer.

Just found it but it was a quote so could be out of date

 

[csd4t]

Airbox to exhaust is the widest point at 550mm.

Hi Martin
Surely the center stand arm sticks out wider than the airbox?

^{_{Subscribers  do not see these advertisements}}

 

[Manic]

Is this any help

 

[csd4t]

Thanks, got all that but that's handlebar/mirror width I think, I really need the above measurement.

 

[funflair]

Hi Martin
Surely the center stand arm sticks out wider than the airbox?View attachment 442311

Beg your pardon, you are right another 60mm but if it mattered you could loose at least 50mm by cutting and rewelding it, I lost most of mine on my 500-4 just going round corners but it worked as long as you could get you toe on the spike the bars are wider but I don't think that was the question.

Martin

 

[Richard n Ann]

The sh300i weighs 165kg a Duke 390 is only 149 just saying

 

[bigtwin]

The sh300i weighs 165kg a Duke 390 is only 149 just saying

And the centre stand measurement?

Ian

^{_{Subscribers  do not see these advertisements}}

 

[Richard n Ann]

And the centre stand measurement?

Ian

Haven't found it yet so it's all good

 

[csd4t]

just realised I said "thigh" level, should read "calf" level. Looking like 550 + 60 from Martins measurement.

 

[funflair]

just realised I said "thigh" level, should read "calf" level. Looking like 550 + 60 from Martins measurement.

Thats my excuse for messing up

 

[604]

If anyone with the above could measure the maximum width at thigh level (from the end of the center stand to the outer of the exhaust) please.
I recently purchased an SH300 but its too big to fit in the van (would be up for a deal if anyone wants a 300) so I hope the 125 will be a bit slimmer.

Hi I have just noticed your post, I don’t know a lot about bikes or if it’s even similar but my son is selling his 2017 Honda Vision 110 with 2300 miles on it. I will be putting it on the classifieds in a few days. Spotless condition. Let me know if it could be of interest to you.

 

[Scotch mist]

Just measured , I’d say about 600mm due to main stand , and about 730mm at handlebars
from memory you need 1200mm height if mirrors are removed

^{_{Subscribers  do not see these advertisements}}

 

[Littlewheels]

If anyone with the above could measure the maximum width at thigh level (from the end of the center stand to the outer of the exhaust) please.
I recently purchased an SH300 but its too big to fit in the van (would be up for a deal if anyone wants a 300) so I hope the 125 will be a bit slimmer.

Why not remove the centre stand? I have a SH125 Mode and never use the centre stand.

 

[csd4t]

Why not remove the centre stand? I have a SH125 Mode and never use the centre stand.

That's all well and good but how would you lube your chain

 

[DBK]

Looking at your avatar if you take the sidecar off it may now fit.

 

[Littlewheels]

That's all well and good but how would you lube your chain

Well,l came up with a simple solution l drilled a hole in the casing that encases the Chain I then boiled up a tin of Grease and used a funnel to fill the case, l then used a grommet to seal it ,l reckon that Chain is good for a lifetime.

 

[604]

Hi I have just noticed your post, I don’t know a lot about bikes or if it’s even similar but my son is selling his 2017 Honda Vision 110 with 2300 miles on it. I will be putting it on the classifieds in a few days. Spotless condition. Let me know if it could be of interest to you.

Now on classifieds

^{_{Subscribers  do not see these advertisements}}

 

[csd4t]

Thanks all, it looks like the 125 is the same width as the 300 (610 ish).
So same question (end of centerstand to outer exhaust) for a Honda Vision and any real life feedback on the power of the 110cc (something the 300 is not lacking), not too bothered about 2 up.

 

[604]

This may help with one of your questions

 

[csd4t]

That's perfect thanks, will fit no problem just concerned about the power now as I'm not a lightweight!!!! Presume the bike will also need an MoT?

 

[604]

Yes I never thought of that, I think you presume correctly. About thirty quid I think, can’t see it requiring anything.