Help with Truma fault code E5 15H

[Captain Lloyd]

I cannot clear/reset this fault, it comes on when I turn on the heating or the hot water, it makes no difference to whether I’m hooked up to electric or not.

Any suggestions please?

 

[Riverbankannie]

I cannot clear/reset this fault, it comes on when I turn on the heating or the hot water, it makes no difference to whether I’m hooked up to electric or not.

Any suggestions please?

Have found this thread (from another place) ! Which explains how to reset

 

[Captain Lloyd]

Have found this thread (from another place) ! Which explains how to reset

Thanks I found this too and tried it but it hasn’t fixed it.

 

[Riverbankannie]

Thanks I found this too and tried it but it hasn’t fixed it.

 

[BouncyBoatFolk]

I cannot clear/reset this fault, it comes on when I turn on the heating or the hot water, it makes no difference to whether I’m hooked up to electric or not.

Any suggestions please?

We have Truma 6 E, I'm not certain for your model, but, have you tried the reset button on the boiler itself? It's lurking underneath the lift off panel which covers the connections. When you identify it , press it AND hold it in for about 10 seconds. It worked on mine when we had a similar fault, [ lockout].
PS. take it off electric hook or hit the test button on the consumer unit unit before poking fingers around under the connections cover, wealth and safety and all that .
Mike

^{_{Subscribers  do not see these advertisements}}

 

[Newfie]

https://www.leisureshopdirect.com/pdf/904361657.pdf

 

[Newfie]

Combustion air motor speed out of tolerance
Replace combustion air motor kit

 

[50dwill]

HELP WITH 514H WE HAVE FITTED 2 NEW ELEMENTS WE ARE BOTH ENGINEERS SO HAVE SOME IDEA WHAT TO DO. Anyway we have the code 514h tried all the above and used a truma themselves reset. STILL 514H TRUMA SAY WE TOOK THE ELMENTS OUT INCORRECTLY, SOUNDS LIKE SALES TALK TO ME. SAME FAULT ON OR OF GAS PLEASE CAN ANY ONE HELP.

 

[BouncyBoatFolk]

It's happened before to someone else .

Help! Truma E514 H error

just arrived on site. 2nd time out. Error as above. Can any tell me the test procedure please? Thanks Tried power off, reset on Truma display No code on the Truma site... Found this but doesn’t work: A: Flashing Code E-514-H displayed in the Truma control panel is due to an incorrect shut...

www.motorhomefun.co.uk

I hope this helps, but basically, patience and a reset on the main board is required.
Mike.

 

[Thenybo]

I cannot clear/reset this fault, it comes on when I turn on the heating or the hot water, it makes no difference to whether I’m hooked up to electric or not.

Any suggestions please?

Hope you figured it out. But in this case where the reset doesnt work you have to trick it by doing only EL2 first, then after a minute you switch to Mix2 and turn up the heat forcing it to start. This worked for me. After an hour of pushing the reset button