Help - Schaudt EBL 226 C

[Moho]

I have a Schaudt Electrloc EBL 226 C + OVP, LR1218 Solar charge regulator and a LT 313 A LED Panel with the LR 1218 regulator outputs ‘Minus Batterie’, ‘Plus Wohnraum-Batterie’ and ‘Plus Starter-Batterie’ connected to BL 4 of the EBL 226 C. Do I also have to connect LR 12 18 regulator outputs ‘Signal Wohnraum-Batterie’ and ‘Signal Starter-Batterie’ to BL7 on the EBL 226 C.

 

[tonka]

Not familiar with these versions but my view is yes..
The connection to BL7 will allow the LED panel to show the charging.
Without the BL7 connected the solar will still work but you wont see any charge rate on the panel.

Schaudt EBL 226 C +OVP Instruction Manual (Page 14 of 16) | ManualsLib

www.manualslib.com

 

[Moho]

Thanks for that, it's what I was thinking after looking at the same daigram.