- Mar 21, 2010
- 2,486
- 2,993
- Funster No
- 10,727
I have a Hobby van with Waeco camera fixed to the back. The monitor has packed up. I have now replaced it with a rear view monitor ( one that clips on to the mirror). I managed to get ever thing working (more by luck than judgement) when I select reverse, BUT would like to have it on all the time so that I could see what is happening behind. Would this be possible?
From the camera I have two wires: 1 grey & white 1 black & red
From the monitor 4 wires: 1 blue 1 red/black 1 black with yellow plug 1 black with yellow plug
I connected up one of the black wire/yellow plug to the black/red from camera
The black cable and red cable I connected to the black & red from the camera
As I said it all seems to work with the connections I made when I select reverse.
Hope some one can help
colyboy
From the camera I have two wires: 1 grey & white 1 black & red
From the monitor 4 wires: 1 blue 1 red/black 1 black with yellow plug 1 black with yellow plug
I connected up one of the black wire/yellow plug to the black/red from camera
The black cable and red cable I connected to the black & red from the camera
As I said it all seems to work with the connections I made when I select reverse.
Hope some one can help
colyboy