Help, missing part (1 Viewer)

[Busman]

hello, been trying to source this part but to no avail. new to looking for parts so any help much appreciated.
Dave

 

[Phill D]

try O'leary's they do most everything

 

[pappajohn]

not a very helpful pic im afraid.

Presumably an outdoor part due to the rust marks/black streaks ?

^{_{Subscribers  do not see these advertisements}}

 

[BreweryDave]

I reckon Johns Cross will be along soon with an answer for you - they have certainly helped me out recently and seem to have (or be able to get!) everything:thumb::thumb::thumb:

 

[icantremember]

It's not too clear from your picture exactly what the part is.

The part looks quite simple, so if you can't find a replacement it should be fairly easy to mould one in glassfibre.

 

[Peter JohnsCross MH]

You could email/phone Ian Mayhew - 01580 883061 on ian@johnscross.co.uk but he will need the picture and make model but I dont hold out a lot of hope as its a body part

Peter

^{_{Subscribers  do not see these advertisements}}

 

[RandallC]

Hi. If you get desperate you could try using a plastic trunking corner cover. Any decent electrical factors or maybe B&Q will have one. They come in several sizes.

Only problem is they are 90' rather than rounded.

Just a thought

 

[Sheddy]

Presuming the opposite side wall cover is still in place, you could remove it, then you may be able to get it copied or source / make a pair of similar covers.

 

[Busman]

Presuming the opposite side wall cover is still in place, you could remove it, then you may be able to get it copied or source / make a pair of similar covers.

Here's the opposite side, will try and source part first but will also look at making one up.
Thanks for all the input
Dave

^{_{Subscribers  do not see these advertisements}}

 

[Aikidomo]

Try here its a plastic extrusion you want, they should have what you are looking for, obviously get your dimensions from the other.

http://www.tubewayextrusions.com/plastic-extrusion-products.html