Help.....damaged roof (1 Viewer)

Nov 6, 2013
3,201
227,256
East Sussex
Funster No
28,906
MH
Hymer B574DL
Exp
Since 2011 (tugger for 20 before that)
Had a bit of a mishap yesterday and caught the bottom of a shop sign on the roof of the MoHo :swear:
Never having undertaken GRP repairs before I was wondering if any of you good folk can give me some tips on how to go about it.
If I can upload the pics you will see that it has punctured the skin (temporarily repaired with Gaffa tape.
I would appreciate any advice.......even if it is "take it to a dealer" ;)

John.
 

Attachments

  • image.jpg
    image.jpg
    147.6 KB · Views: 81
  • image.jpg
    image.jpg
    140.4 KB · Views: 79
  • image.jpg
    image.jpg
    112 KB · Views: 76
Apr 13, 2012
5,504
18,593
Funster No
20,541
MH
Mobilvetta Euroyacht
Exp
1996, then break 'til 2011
Simple enough repair, if you feel up to it : remove any loose bits, 'key' area, fill ( not too much) with car body filler, rub down, prime and paint.

Hardest thing will be matching the colour (hundreds of whites/greys

Otherwise try a local bodyshop (not the Bodyshop :LOL:) - shouldn't cost a lot for a professional finish(y)
 

DuxDeluxe

LIFE MEMBER
Jul 10, 2008
14,628
72,241
Planet Zog
Funster No
3,243
MH
A woosh bang van
Exp
since 2008
Unlucky........ Sorry to hear of that.

The positive side is that it is in an area that is not easy to see and looks to be reasonably easy to repair for anyone who can do a bit of good DIY. Also, it does not look structural though that depends on how Autotrail Motorhomes are built.

It's probably a good idea to google "GRP repairs" and see if you think you can DIY. Also have a look around for a local boat repairer or similar. A dealer will probably just send it to a specialist anyway. Even a local car repair place could probably do it. Others will have much better ideas, best of luck anyway and keep us posted on progress.

Edit - just seen Burstner's reply

Subscribers  do not see these advertisements

 
OP
OP
Baycott
Nov 6, 2013
3,201
227,256
East Sussex
Funster No
28,906
MH
Hymer B574DL
Exp
Since 2011 (tugger for 20 before that)
Thanks to you all for the advice.
I'm not bad with DIY so will give it a go.
That looks great Bungy(y)
Thanks for the link
John
 
Feb 24, 2013
12,991
101,181
Bolsover, Derbyshire
Funster No
24,833
MH
Hymer S800
Exp
not long enough
I did similar damage to a car bumper once, looked like I had written can off at first glance :(

Mended and repainted in a day, looked as good as new, I don't do and for what it cost me I would not even try to mend myself, but mine would have been more visible than yours

The key thing is not to ask your MH dealer to mend it, do as suggested above, boat yard, car body shop, bumper specialists

Hopefully nowhere near as bad as you first thought (y)

Subscribers  do not see these advertisements

 
Jan 24, 2010
2,438
4,844
Funster No
10,065
MH
Adria Twin
Exp
Since 2007
Thanks to you all for the advice.
I'm not bad with DIY so will give it a go.
That looks great Bungy(y)
Thanks for the link
John
your welcome...youre not the first and sure as hell wont be the last to have a minor alteration like that!!...

Edit - meant to add, whilst your waiting to get it done, give it a good wipe down with white spirtit/meths etc and get it taped up to stop moisture getting in - given where it is you need to make sure its sealed as you might end up sealing it in!! (been there done that)
 
Nov 18, 2011
11,857
42,489
Planet Earth
Funster No
18,938
MH
A van
Exp
Over 25 year's
that a very esay repare if you know how to sand something down then get the gel cote code put on the gell cote allow to dry rub down with wet and dry finishing wit the finest you can get then spray with Laker that how I would do it
my fix it meet next year I am doing a body reaper including fibre glass repair got lods to do on my van but haven had time with fixing engine and using it
 
Sep 11, 2012
99
65
Cheltenham
Funster No
22,864
MH
Low profile
Exp
1
When carrying out grp works the existing top gel coat needs to be removed from the area that needs repair. Use a small grinder or sander and get right back to the resin base.then you can apply a matting and resin,sand down and apply a gel coat then paint to match.always clean down at each stage with acetone,if you try to gel coat onto gel coat it will probably peal off in a few weeks.being a grp roof installer we make repairs as part of our works if you were closer I could have given you the correct resins and matting to carry out the works.
 
OP
OP
Baycott
Nov 6, 2013
3,201
227,256
East Sussex
Funster No
28,906
MH
Hymer B574DL
Exp
Since 2011 (tugger for 20 before that)
your welcome...youre not the first and sure as hell wont be the last to have a minor alteration like that!!...

Edit - meant to add, whilst your waiting to get it done, give it a good wipe down with white spirtit/meths etc and get it taped up to stop moisture getting in - given where it is you need to make sure its sealed as you might end up sealing it in!! (been there done that)
Thanks again Bungy.
I taped it up the same day......just as well I did as we had a terrific storm that night.

that a very esay repare if you know how to sand something down then get the gel cote code put on the gell cote allow to dry rub down with wet and dry finishing wit the finest you can get then spray with Laker that how I would do it
my fix it meet next year I am doing a body reaper including fibre glass repair got lods to do on my van but haven had time with fixing engine and using it
Thanks Bill.
I only wish your repair was as simple as mine seems to be.
Best of luck with yours. (y)


When carrying out grp works the existing top gel coat needs to be removed from the area that needs repair. Use a small grinder or sander and get right back to the resin base.then you can apply a matting and resin,sand down and apply a gel coat then paint to match.always clean down at each stage with acetone,if you try to gel coat onto gel coat it will probably peal off in a few weeks.being a grp roof installer we make repairs as part of our works if you were closer I could have given you the correct resins and matting to carry out the works.

Thanks Zajacp.
Will bear all that in mind.
 
Apr 13, 2012
5,504
18,593
Funster No
20,541
MH
Mobilvetta Euroyacht
Exp
1996, then break 'til 2011
Nothing worse than a bad repair - especially on a motorhome - I'd take it to Johns Cross as they are local - no harm getting a quote

Subscribers  do not see these advertisements

 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Funsters who are viewing this thread

Back
Top