Habitation door step on Integra

Root

Free Member
Joined
Jun 5, 2021
Posts
3
Likes collected
1
Funster No
81,720
MH
Eura Mobil Integra
The step which is an Omnistor, works intermittently, on retraction, from the habitation door control, but works fine from the cab control.

Apparently it is a Eura Mobil installation not Thule.

Any ideas please.

Thanks
 
The step which is an Omnistor, works intermittently, on retraction, from the habitation door control, but works fine from the cab control.

Apparently it is a Eura Mobil installation not Thule.

Any ideas please.

Thanks
Might be a good idea to check under the step as there is a switch on it that can get bunged up with crud off the wheels and probably needs cleaning😊 I fitted a guard over ours to keep it clean😊
 
if it works off one switch but not the other, I would suspect the contacts on the bad switch
 
My hab door switch didn't work at all, and you can't by replacements for a 2004 van, so I managed to strip the unit and replace the component on the pcb...
 
Thanks for suggestions will give them a go

Subscribers  do not see these advertisements

 
Thanks for your suggestions, steps seems to work well now.

Fingers crossed problem solved, thanks again.
 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Back
Top