Globecar Newbie (1 Viewer)

[Big Stevie]

Hi Folks,

Try to heat the van up enough to stop the water autodumping but cant figure out the setting on the Truma CP Plus control panel for heating without the boiler.
Can anyone help?

 

[klaatu]

Select the motorhome icon with the rotary control, then push it. Select the desired temp with the rotary control, then push it to confirm.

 

[Big Stevie]

Do that and leave the boiler switched off until correct temp achieved and water tank filled?

^{_{Subscribers  do not see these advertisements}}

 

[klaatu]

Sounds good to me.

 

[jezport]

Rotate button till the gas bottle and lightning sign are flashing, push button to select rotate button for gas or electric or both, press button to select.
Then rotate button till motorhome symbol flashes and press button, rotate button to selected temperature and press to select, then leave to heat.
Bare in mind even on blown air heating the water will still get heated and if on a long time the water will still get very hot. This is not a fault.

 

[Big Stevie]

Thanks folks

^{_{Subscribers  do not see these advertisements}}

 

[Big Stevie]

One last question folks..
Do I need to reset the dump valve or does it automatically close at the required temperature?

TIA

 

[klaatu]

You have to reset it. I think on older ones you pull it out, and on newer ones you push the button.

 

[Big Stevie]

Cheers, Another trip to the storage yard required...

^{_{Subscribers  do not see these advertisements}}