Exhaust pipe woes. (1 Viewer)

[Snails Pace Ste]

Hi all. During a recent trip to France (August) i lost the end section of my exhaust pipe up to the clamp that secured it to the outer section of the exhaust itself. After numerous enquiries to different suppliers giving fantastically high prices for more than i need. I only require a 12" length of pipe (preferably stainless steel) i was wondering if any subscribers could point me in the direction of a reputable supplier. I have measured the diameter but not sure if i should use the outer size of the exhaust or the inner size of the old damaged exhaust as a reference for the new piece. The MOT is due on the 3rd of Jan so any advice would be greatly appreciated. Thanks in advance. Steve.

 

[LesW]

I've bought stainless exhaust tubing on Ebay in the past.

 

[Snails Pace Ste]

Thanks for replying Les. which diameter did you use please.

^{_{Subscribers  do not see these advertisements}}

 

[Landy Andy]

This is what I bought and fitted to my Ducato motorhome. Very nice quality and would happily buy again.

Clamp-On 2.5" 64mm Inches Universal Curled Down Exhaust Tail Pipe Trim Stainless | eBay

Universal Curled Down Exhaust Tail Pipe Trim 64mm 2.5". Curled Down Tail Pipe. Exhaust Fitting Kits. Exhaust Reducers / Connectors. Easy To Fit onto any round pipe. Bolt-on version will fit 60mm to 63mm pipe.

www.ebay.co.uk

 

[Snails Pace Ste]

Thanks Andy 63mm was the measurement i got on one of mine. Do you happen to remember where you purchased it from Thanks.

 

[Geo]

If the last bit of remaining pipe has splits you need to use the inner measurements if not you use the outer and your new pipe will need 2 splits cutting in it

^{_{Subscribers  do not see these advertisements}}

 

[Landy Andy]

Thanks Andy 63mm was the measurement i got on one of mine. Do you happen to remember where you purchased it from Thanks.

I got it from the eBay link I shared in the above post. I also bought a joiner but didn’t need it.

 

[The Coops]

Contact Bosal Uk based ln Bamber Bridge, they used to do all kinds of one off systems , no idea if they still do but worth a try

 

[Landy Andy]

Joiner I purchased.

<Broken link removed>

^{_{Subscribers  do not see these advertisements}}