Electrical problem (1 Viewer)

[BusyBuilder]

We just fitted new LRM1218 to EBL99. The electrician disconnected the kettle lead. Now the water pump isn't working.
Fuses are okay, water in tank but no pump.

Any ideas ?

 

[Zigisla]

Does anything else work? Lights, flush etc?

 

[BusyBuilder]

Yes everything else working. Checked 5amp fuse as well. Regulator is Schaudt LRM1218

^{_{Subscribers  do not see these advertisements}}

 

[Minxy]

In the controller remove all the fuses and push them back in to make sure they are 'seated' correctly, same with any leads that are removable, it could simply be that one has been knocked and isn't making contact.

 

[Lenny HB]

Could be just coincedence and the pump has died. try putting 12v straight on the pump to see if it runs. Also did you check the pump fuse with a meter to make certain it is OK. Are all the plugs in firmly on EBL as the sparks may have removed some for easier access.

 

[BusyBuilder]

Will do that when home tomorrow. Thanks all I think it's just a coincidence.

^{_{Subscribers  do not see these advertisements}}