Ducato 2.8jtd m. 2001 technic

[Mrseoinage]

Hey. I have big problem. I have airbag light problem. It has turned on suddenly and i cant turn it off. I have checked seat belts cables and all electric wires. All fuses and relays. Please help me. This model dont have obd 2 place. Only three pins system

 

[MC 55 FUN]

Highly likely that it's airbag ecu failure, a very common issue, it can be caused by low voltage when trying to start the vehicle, amongst other factors.

 

[Boringfrog]

Does you van have an airbag, mines 2004 and there's not one fitted?

 

[Podney]

Ignore it. Get it sorted at next service.

 

[TheBig1]

have you checked the clock spring in the steering wheel? assuming your van does have air bags

^{_{Subscribers  do not see these advertisements}}

 

[Figaro]

Does you van have an airbag, mines 2004 and there's not one fitted?

My thoughts too ???

 

[Mrseoinage]

Yes it has airbag

 

[nicholsong]

Does you van have an airbag, mines 2004 and there's not one fitted?

I have a 2003 2.8jtd MH, but ex FIAT Nov 2002. It has 'Airbag' label, but does that mean nothing and there may not be an airbag underneath?

Geoff

 

[Mrseoinage]

I have opened it. And there was airbag

 

[Gromett]

I had a problem with my Ducato 03 not starting. Couldn't get ODB2 to work but got this working.

You can buy an ELM327 Bluetooth adapter off ebay with MultiECUScan compatibility. Then download FiatECUScan software.

This works and gives you lots of diagnostic info. Not sure if it covers airbags as I didn't have one in my van and didn't look at that area of the software.

I no longer have a Fiat so can't check for you sorry.

^{_{Subscribers  do not see these advertisements}}

 

[Gromett]

PS: It looks like they may have renamed it from FiatECUScan to MultiECUScan. Lots of sites with dodgy links to the old version.

I don't have time at the moment to chase this up for you. But the original source of the software is here. You can check your vehicle is on the list.

Multiecuscan - Diagnostics software for Italian cars

 

[Clivefog]

Disconnect and charge engine battery, once charged reconnect and start. If you still have the light the ECU fault(s) need to be cleared. Of course there may be a real problem that needs investigation.