Chausson Table Leg (1 Viewer)

[Joshorty1]

Hi I'm new to this forum, I need some help we have broken the leg in our 2919 Chausson 767ga and need to find a replacement. I have rung Chausson and they are quoting £680 for the leg and £750 for the gubbings under the table top... Any ideas would greatfull?

 

[Sandancers]

Can you define what you mean by broken ?

 

[The Wino]

My friends taken the table out of his 610 as he felt it took up too much space and I think several others have done the same. Why no put a message on the Facebook Chausson owners group to see if anyone has taken one out and wants to sell it?
As sandancers says in what way is it broken.

^{_{Subscribers  do not see these advertisements}}

 

[Joshorty1]

Hi the leg is bent and the table top moves about. I fell on it.

 

[Joshorty1]

I tried on the Chausson group without success.

 

[Sandancers]

Hi the leg is bent and the table top moves about. I fell on it.

Have you looked under the plastic covering at the actual mechanism of the leg ? From memory of when I took ours out while working on the batteries the leg is a fairly substantial piece of metal. I would be surprised if a decent small metal working company could not repair it somehow.

Once the leg was repaired I would contact a good cabinet-maker / joiner and see how they could fix any problems with the table top, or even remake the whole table top if required.

Unless you are planning to use the MH over winter you have several months to get it fixed. Why not take it out and see if it can be repaired as above ? I would be it would be a lot cheaper than buying a new one !

^{_{Subscribers  do not see these advertisements}}

 

[TheBig1]

take it apart and replace the gas strut if that is the issue. sgs either stock or can make a replacement

 

[TheBig1]

Contact Us

www.sgs-engineering.com

 

[The Wino]

take it apart and replace the gas strut if that is the issue. sgs either stock or can make a replacement

It raises on an electric motor

^{_{Subscribers  do not see these advertisements}}

 

[TheBig1]

It raises on an electric motor

does it? looks identical to others that are a gas strut

 

[acropolis22]

does it? looks identical to others that are a gas strut

Seems to have electrical wiring hanging off it?

 

[TheBig1]

Seems to have electrical wiring hanging off it?

the red wire with crocodile clip on? looks like a battery charger just out of the photos. Red lever under the table for height adjusting. The cable and "brake lever" to release the table top to slide

^{_{Subscribers  do not see these advertisements}}

 

[The Wino]

the red wire with crocodile clip on? looks like a battery charger just out of the photos. Red lever under the table for height adjusting. The cable and "brake lever" to release the table top to slide

If it's anything like ours they rise on an electric motor.