My 2015 Swift Escape has X2 Calor Gas bottles in the locker. When swapping them out as I remove the hose from the bottle it tends to leave in the bottles receiver a black rubber bung/seal. I then have to pull it out by means of a key or screwdriver etc so I can place it back on the hose to put in the new bottle.
This has overtime stretched it and caused a slight tear in it so the seal is not as good and I had to add PTFE tape to the thread so avoid a slight leak last time.
I have been scouring the internet and even my local caravan shop to find a replacement but to no avail. Anyone know of this bit of rubber with a hole in it and where I can get one? I should have taken a picture but don't want to pull it out just for that purpose now as its on a new bottle and nicely sealed.
This has overtime stretched it and caused a slight tear in it so the seal is not as good and I had to add PTFE tape to the thread so avoid a slight leak last time.
I have been scouring the internet and even my local caravan shop to find a replacement but to no avail. Anyone know of this bit of rubber with a hole in it and where I can get one? I should have taken a picture but don't want to pull it out just for that purpose now as its on a new bottle and nicely sealed.