Burstner Ixeo high level brake light removal (1 Viewer)

[gerrym11]

Hi, can any kind person let me know how to remove the brake light housing (I have the Burstner logo type). There don't seem to be any screws so I assume it is just stuck on but am a bit worried about just trying to lever it off in case I break something.

Thanks

Gerry

 

[M-J]

Based on the pictures in the link below it appears to be stuck on..

Lampa stop LED- logo

The Burstner part number is 1501331 which may help with finding more info.

 

[Two on Tour]

If it is stuck on as would appear, then I would apply heat to it with a hairdryer to soften the adhesive while gentle prising it off.

^{_{Subscribers  do not see these advertisements}}

 

[gerrym11]

Based on the pictures in the link below it appears to be stuck on..

Lampa stop LED- logo

The Burstner part number is 1501331 which may help with finding more info.

What a great find, thank you. The power of this forum never ceases to amaze me!

 

[Kenp]

The photo below shows the rear side with an adhesive layer under the foil (in green color).

 

[KarlosX250]

It is indeed stuck on as the picture shows.
Ours had some LED's out and only just passed the MOT (50% or more unlit and they fail) so when i found out the price for a new one, (and that they were on a 3-month back order from Burstner) i carefully prised the two halves apart, took the main board out and soldered some new LED's in.
I already had some 3M double sided foam tape to put it all back with.

^{_{Subscribers  do not see these advertisements}}