Burstner it726G Control Panel (1 Viewer)

[ian4apenny]

We seem to have acquired a little fault on our Burstner control panel (an IT96-2 model) since our last trip away. I've been scratching my head and reading the manuals but can't think what might be wrong.

Basically, although both the vehicle and leisure batteries are nearly fully charged and work everything/start the engine, no charge is registering on the control panel gauge when the button is pushed for either battery. The gauge lights up when either button is pushed - but no measurement.

Has anybody got an idea of what could be wrong? Is there a fuse somewhere which needs checking?

 

[Mike n Kim]

Hi Ian4apenny, did you manage to find the cause?
I ve recently got the same problem on my 2013 Burstner 724 ixeo it plus.
Any ideas be very helpfull.

 

[ian4apenny]

Hi Ian4apenny, did you manage to find the cause?
I ve recently got the same problem on my 2013 Burstner 724 ixeo it plus.
Any ideas be very helpfull.

Yes, unfortunately it required a new panel as it was found to be faulty. Done under warranty though

^{_{Subscribers  do not see these advertisements}}

 

[Mike n Kim]

Thanks, i was hoping it was something simple, and cheaper.
The needles on my panel do move very slightly but not a worthwile reading.
I may try and remove next week and have a look, ive got nothing to lose.

 

[bigtwin]

@Mike n Kim check out http://www.apuljackengineering.co.uk/

Ian

 

[ian4apenny]

Yes, mine was rhe same - slight flutter on the needles. As you say, worth a try as might be just a fuse or loose connection. The garage would just replace and claim off Burster anyway.

^{_{Subscribers  do not see these advertisements}}