DBK
LIFE MEMBER
I was a teenager when I made my last model aircraft so that is well over 50 years ago and if I'm being honest closer to 60 years ago!
I made a few aircraft which flew reasonably successfully with the exception of my last free flight model which I took home in a bag after its maiden flight and then there was the control line model which didn't manage to complete a lap - so very mixed success all those years ago.
What I could never afford was radio control (RC) equipment so that itch remained unscratched - until this month when I bought a 6 channel transmitter and receiver from AliExpress for under £50. You can spend a lot more but the FlySky model I bought has excellent reviews and some clever features including coming with a lead I can plug into my PC and run a simulator program where I can practice flying - and crashing with no need for a bag to collect the remains of the aircraft after the inevitable beginner's crashes.
But the biggest surprise is how model kits have involved. You can still get a few kits identical to the ones I used to buy but the one I've bought has some materials which didn't exist back then.
There's still sheets of wing ribs but these ones are laser cut. There's also a bag of 3D printed components and a bundle of carbon fibre rods and tubes.
The wing plan shows where most of the carbon fibre goes. The main spar and both leading and trailing edges are carbon fibre and another larger tube forms the tail boom which you can see at the top of the plan.
The innovation doesn't stop there. No more balsa cement, several adhesives are needed for this model, normal super glue on the far left in this shot, Super 'Phatic glue in the middle and PVA on the far right. Not shown is epoxy which is needed in a couple of places. The Super' Phatic is something I hadn't come across but it's a high wicking adhesive used to flow into joints which have already been formed. I thought it was some sort of super glue until I tried it but it's more of a very thin PVA, hence the need for clamping.
I've started on the fuselage this afternoon and it's going well I think, I'll finish it off tomorrow and then start on the wings.
Covering will be the biggest learning curve. No more tissue and dope - it will be self-adhesive heat-shrink film. What could possibly go wrong?
I made a few aircraft which flew reasonably successfully with the exception of my last free flight model which I took home in a bag after its maiden flight and then there was the control line model which didn't manage to complete a lap - so very mixed success all those years ago.
What I could never afford was radio control (RC) equipment so that itch remained unscratched - until this month when I bought a 6 channel transmitter and receiver from AliExpress for under £50. You can spend a lot more but the FlySky model I bought has excellent reviews and some clever features including coming with a lead I can plug into my PC and run a simulator program where I can practice flying - and crashing with no need for a bag to collect the remains of the aircraft after the inevitable beginner's crashes.
But the biggest surprise is how model kits have involved. You can still get a few kits identical to the ones I used to buy but the one I've bought has some materials which didn't exist back then.
There's still sheets of wing ribs but these ones are laser cut. There's also a bag of 3D printed components and a bundle of carbon fibre rods and tubes.
The wing plan shows where most of the carbon fibre goes. The main spar and both leading and trailing edges are carbon fibre and another larger tube forms the tail boom which you can see at the top of the plan.
The innovation doesn't stop there. No more balsa cement, several adhesives are needed for this model, normal super glue on the far left in this shot, Super 'Phatic glue in the middle and PVA on the far right. Not shown is epoxy which is needed in a couple of places. The Super' Phatic is something I hadn't come across but it's a high wicking adhesive used to flow into joints which have already been formed. I thought it was some sort of super glue until I tried it but it's more of a very thin PVA, hence the need for clamping.
I've started on the fuselage this afternoon and it's going well I think, I'll finish it off tomorrow and then start on the wings.
Covering will be the biggest learning curve. No more tissue and dope - it will be self-adhesive heat-shrink film. What could possibly go wrong?






