Air Nozzle RAC900 (1 Viewer)

[Steve101uk]

Hi

I am trying to find a replacement for nozzle and gauge (pictured) for my RAC900 compressor. The pin inside the nozzle is damaged and no longer functions. despite many searches I cant find a replacement without buying the whole system again.

Thanks Steve

 

[Late Starting]

Have you tried talking to Ring the makers

 

[Robert Clark]

You can call them direct
Customer Service
Tel: 0113 213 7379

^{_{Subscribers  do not see these advertisements}}

 

[Robert Clark]

And you can email them via their website

http://www.ringautomotive.co.uk/uk/content/contact-us

 

[daveinspain]

I had exactly the same problem while in the UK last year, eventually gave up trying to get a brass replacement and bought a plastic one from Halford for a few pounds. Just cut the old one off and use a jubilee clip to fit the new one - works perfectly.

 

[jezport]

I had a similar problem and bought one of these Broken Link Removed

I then unscrewed the little valve out at the end and screwed onto my compressor

^{_{Subscribers  do not see these advertisements}}

 

[tonyidle]

I had a similar problem and bought one of these Broken Link Removed

I then unscrewed the little valve out at the end and screwed onto my compressor

That suggests that a simple Schraeder valve (like the one fitted to each wheel) would do the job?

 

[jezport]

You need the male end to screw to your damaged end then the other female end does on any valve the want to pump up.