60mm pipe adapter wanted (1 Viewer)

[Clickem]

The plastic thread on our water tank filler seems a bit flakey, and I am always aware that it would be very easy to fit the cap cross threaded

I was wondering if it would be possible to find a permanent adapter to screw on to the tank, so I am using the adapter male thread, rather than the tank male thread

Think I need a 60mm x 2mm pitch, female to male adapter. It could be with a smaller thread/cap on the male end, but the overall depth needs to be no more than 45mm, or the door will not close

Anyone any ideas?

TIA

 

[Eggs]

The plastic thread on our water tank filler seems a bit flakey, and I am always aware that it would be very easy to fit the cap cross threaded

I was wondering if it would be possible to find a permanent adapter to screw on to the tank, so I am using the adapter male thread, rather than the tank male thread

Think I need a 60mm x 2mm pitch, female to male adapter. It could be with a smaller thread/cap on the male end, but the overall depth needs to be no more than 45mm, or the door will not close

Anyone any ideas?

TIA

You could try these https://www.geoquipwatersolutions.com/user/HPL - 2017 Hydrodif Company Profile.pdf

I think you may come unstuck on 45mm clearance.

 

[Steve and Pam]

Could it be 2" bsp 59.614 mm x 2.3 mm pitch?

^{_{Subscribers  do not see these advertisements}}

 

[Clickem]

Could it be 2" bsp 59.614 mm x 2.3 mm pitch?

German van, I was expecting metric measurements

 

[Ditcha]

Not know anybody with a 3D printer that could print you one?

 

[Speve]

Not know anybody with a 3D printer that could print you one?

PaulandChrissy do a few bits and pieces worth giving them a shout?

^{_{Subscribers  do not see these advertisements}}

 

[PaulandChrissy]

Hi
if you send me the Cap as a pattern, I can make you an extension no problem. It may take a couple of tests to get the thread perfect for the tank, but it’s no problem to make.

PaulandChrissy.

 

[Lenny HB]

German van, I was expecting metric measurements

Most European pipe fittings are BSP.

 

[Eggs]

Most European pipe fittings are BSP.

Yep, I'd guess it's 2".

^{_{Subscribers  do not see these advertisements}}

 

[Clickem]

I have ordered a tank cap, which I hope will fit my tank. If so I will look at putting a fitting in the centre of the cap to allow me to fill through that. Thanks for the offer PaulandChrissy, may come to you at that point

 

[Clickem]

Most European pipe fittings are BSP.

Cap thread is 2 5/16ths to 2 3/8ths of an inch across, exactly 60 mm

 

[PaulandChrissy]

If yo want something made to go in the centre of the cap tilted up to help filling, just ask. Im always happy to help make something special. . PaulandChrissy

^{_{Subscribers  do not see these advertisements}}

 

[Stealaway]

Could you not clean up the existing threads with a thread file?

Thread Restorer Files External Thread Restoring METRIC BSW BSF BSP BSPF UN SAE | eBay

BSW / BSF Size - AB, BT, FK, GY, HS, IM, IV, KA, KW, PA, PH, ZE, all Islands excluding IOW. Another great product by Anchor.

www.ebay.co.uk

 

[Clickem]

Could you not clean up the existing threads with a thread file?

Thread Restorer Files External Thread Restoring METRIC BSW BSF BSP BSPF UN SAE | eBay

BSW / BSF Size - AB, BT, FK, GY, HS, IM, IV, KA, KW, PA, PH, ZE, all Islands excluding IOW. Another great product by Anchor.

www.ebay.co.uk

A thread file would be good for "re-aligning" a damaged thread but I suspect would be more likely to remove more of the plastic thread that I have now

 

[Sasbo]

Looks like an IBC standard 60mm thread. Link to fittings below.

IBC S60x6 (2 Inch) Pipe Elbow

The IBC S60x6 (2 Inch) Pipe Elbow fits all IBC’s with a standard 2” buttress thread valve. Buy online from Direct Water Tanks.

www.directwatertanks.co.uk

^{_{Subscribers  do not see these advertisements}}

 

[Steve and Pam]

They are a 6mm pitch not 2mm ish

Looks like an IBC standard 60mm thread. Link to fittings below.

IBC S60x6 (2 Inch) Pipe Elbow

The IBC S60x6 (2 Inch) Pipe Elbow fits all IBC’s with a standard 2” buttress thread valve. Buy online from Direct Water Tanks.

www.directwatertanks.co.uk

 

[Sasbo]

Then this IBC to BSP adaptor may be of use to allow the wide range of IBC fittings to be utilised to provide a workable solution.

IBC S60x6 (2 inch) Female to 2 inch BSP Female Swivel Buttress

IBC S60x6 (2 inch) Female to 2 inch BSP Female Swivel Buttress - Direct Water Tanks

www.directwatertanks.co.uk

 

[Clickem]

Looks like an IBC standard 60mm thread. Link to fittings below.

IBC S60x6 (2 Inch) Pipe Elbow

The IBC S60x6 (2 Inch) Pipe Elbow fits all IBC’s with a standard 2” buttress thread valve. Buy online from Direct Water Tanks.

www.directwatertanks.co.uk

Sure mine is a finer thread than this. Pitch is 2mm

^{_{Subscribers  do not see these advertisements}}

 

[Sasbo]

See post #17 for finer thread option.