3D Printed Mitre Clamp (1 Viewer)

[olley]

Looking around for something to print and thought of a Mitre clamp, I don't have one and how I have managed for 70 years without one I don't know, so time to rectify that.
I did the first one with 8mmx1.5 printed screws but they just broke so I remade in 12mmx1.75 but they weren't much better for a heavy handed bloke like me, so I used steel bolts in the end with a printed knob on the end. I machined a recess 8mm from the end of the bolt so a modified paper clip goes through the clamp plate and stops it falling of the end of the bolt. Made two in the end.

 

[Chipster]

Really fancy a 3D printer.

 

[olley]

Almost as cheap as an ordinary printer nowadays, in fact the Laser printer was dearer.

^{_{Subscribers  do not see these advertisements}}

 

[Bobby-gg]

Looking around for something to print and thought of a Mitre clamp, I don't have one and how I have managed for 70 years without one I don't know, so time to rectify that.
I did the first one with 8mmx1.5 printed screws but they just broke so I remade in 12mmx1.75 but they weren't much better for a heavy handed bloke like me, so I used steel bolts in the end with a printed knob on the end. I machined a recess 8mm from the end of the bolt so a modified paper clip goes through the clamp plate and stops it falling of the end of the bolt. Made two in the end.

View attachment 477907

Nice one

Have you uploaded your design anywhere?

I remixed a holder for a 6mm 5 way wago connector from a 4mm one last night, wanted to use one as a neutral busbar in the van



And I'm just designing a terminal cover for my victron battery protect as we speak

 

[Vipar]

Can you use a 3D printer without the ability to operate CAD?

 

[Bobby-gg]

Can you use a 3D printer without the ability to operate CAD?

Totally, have a look at thingiverse.com and see what other user's have designed, they are free to use.

But, I enjoy the design part of it as much as the final product

^{_{Subscribers  do not see these advertisements}}

 

[Manic]

Looks good.
Just out of interest did you print the thread in the final version.

 

[olley]

Looks good.
Just out of interest did you print the thread in the final version.

Yes I printed the internal 12mm thread but I had to run a tap through it to get the bolt to go in without forcing it.
Uploaded to thingiverse Bobby-gg

 

[Ditcha]

Son has just printed some mounts for my eufy cameras for the house clever stuff.

^{_{Subscribers  do not see these advertisements}}

 

[Vipar]

That great site. I would love one of those rulers with all the holes in for marking wood.

 

[Vipar]

I would love one of these..

Marking Gauge by JonnyGreenThumbs

There are a few of these already posted but I did not like the style, assembly, or precision of some previous models. Post processing alignment is not necessary. Use a filament with a low coefficient of thermal expansion such as PLA (I used PETG). This model's STP has been included if you would...

www.thingiverse.com

 

[Bobby-gg]

I would love one of these..

Marking Gauge by JonnyGreenThumbs

There are a few of these already posted but I did not like the style, assembly, or precision of some previous models. Post processing alignment is not necessary. Use a filament with a low coefficient of thermal expansion such as PLA (I used PETG). This model's STP has been included if you would...

www.thingiverse.com

Guess you've been checking out thingiverse then Vipar

^{_{Subscribers  do not see these advertisements}}

 

[Vipar]

Guess you've been checking out thingiverse then Vipar

Yes what an interesting site. Not sure that I would get value for money by the time that I purchased the printer materials. Then I am not sure that I have the skills to complete the job Better if I pay someone to do it for me. I could soon have a list

 

[olley]

I would love one of these..

Marking Gauge by JonnyGreenThumbs

There are a few of these already posted but I did not like the style, assembly, or precision of some previous models. Post processing alignment is not necessary. Use a filament with a low coefficient of thermal expansion such as PLA (I used PETG). This model's STP has been included if you would...

www.thingiverse.com

Is that a hint?
Just printing the smaller ones, the full size are too big for my little ender, but I have been able to slice the end of each one in meshmixer so I will try to print them as well.