2019 adria twin

[Wullie-d]

Has any of you guys had the rear door strap kit put on your 2019 adria twins.these vans came with no straps to stop the doors opening right up.

 

[Wombles]

Many do fit the door retainers (if not fitted as standard) plus this type of bumper extension too as even with the restrainers fitted a strong gust of wind can still force the doors back & damage the windows:

 

[Wullie-d]

OK thanks where do you get the bumper extentions from

 

[Wombles]

OK thanks where do you get the bumper extentions from

They are 3D printed by a German Facebook friend but with the problems receiving parcels from Germany at present it may be worth asking PaulandChrissy & other Funsters with printers on here to see if they can do something similar? Have seen other 3D printed versions so the info. to do this may be readily available.

 

[berni109]

This is what I did to stop the doors at 90°

PVC rear door stays.

If your van converter has fitted rear windows and has done nothing to stop the doors opening to more than 90° here is what you can do. Remove the lower interior door trims. Buy new stays for about £15 each side(ebay). Simple job to remove and refit. Spring loaded stops will prevent door opening...

www.motorhomefun.co.uk

^{_{Subscribers  do not see these advertisements}}

 

[Wombles]

They are 3D printed by a German Facebook friend but with the problems receiving parcels from Germany at present it may be worth asking PaulandChrissy & other Funsters with printers on here to see if they can do something similar? Have seen other 3D printed versions so the info. to do this may be readily available.

For those with 3D printers here's one version of the file to do this https://www.prusaprinters.org/print...P1AfkX_SUWy4krx4YHs4SGys2i3w-zxQYpqyK1Q6BwRic