2008 S-liner 700 glass hob (2 Viewers)

[smithy184]

The glass hob on my cooker has cracked and needs replacing. Its a Dynaxo 2 hob unit. Have inquired from Germany and a new unit is around £800. Has anyone changed one for a more conventional gas hob and if so how?

 

[Fletton]

is around £800

.....

 

[TheBig1]

a piece of smoke grey acrylic could be fitted

^{_{Subscribers  do not see these advertisements}}

 

[Theonlysue]

Is there not a glazing manufacturer who could make you one?

 

[TheBig1]

a sheet of glass could be cut, drilled, polished and hardened, however for what it does, using fragile glass seems ridiculous. a piece of 6mm acrylic would do the same job, look the same but not break again

 

[smithy184]

Should have explained the hob in more detail. It is more like a ceramic hob but with a flat glass surface that the pans sit on over the gas burners. Have seen photo's of similar knaus models that have had a proper gas hob fitted and was hoping that a funster had done something similar.

^{_{Subscribers  do not see these advertisements}}

 

[TheBig1]

Should have explained the hob in more detail. It is more like a ceramic hob but with a flat glass surface that the pans sit on over the gas burners. Have seen photo's of similar knaus models that have had a proper gas hob fitted and was hoping that a funster had done something similar.

a ridiculous hob to fit in a motorhome. i am certain a conventional hob could be fitted in it's place cheaper