Dazzlin
LIFE MEMBER
- Oct 31, 2012
- 1,751
- 6,213
- Funster No
- 23,504
- MH
- 1986 Hymer A Class
- Exp
- From 2013
Our dethleffs has some great flourescent strip lights which are sort of behind the facia, above the wall units. One in dining area and two in bedroom, really effective but they only run when on hookup.
We have only used hookup twice in the last four months on the road!
I was going to try and rig something up through my little 300w inverter but the two feeds from the mains box are "sockets" - good, I want to include those, and the other is labelled "fridge, charger and lights" and there are only two cables from that part before they dissappear into the floor.
I tried connecting to one but it did the charger and lights so they must be connected at that end. I guess the charger is incorporated into the electroblok.
I also wondered if I feed the 230v sockets from the inverter and tap off the same cable to the light switch am I going pop something?
With basic elec knowledge is this possible, or do I have to see an auto electrician?
Any suggestions or advice please?
We are not back in uk til july and I am itching to have a play before then.
We have only used hookup twice in the last four months on the road!
I was going to try and rig something up through my little 300w inverter but the two feeds from the mains box are "sockets" - good, I want to include those, and the other is labelled "fridge, charger and lights" and there are only two cables from that part before they dissappear into the floor.
I tried connecting to one but it did the charger and lights so they must be connected at that end. I guess the charger is incorporated into the electroblok.
I also wondered if I feed the 230v sockets from the inverter and tap off the same cable to the light switch am I going pop something?
With basic elec knowledge is this possible, or do I have to see an auto electrician?
Any suggestions or advice please?
We are not back in uk til july and I am itching to have a play before then.
Last edited: