Ducatto wheel trims. (1 Viewer)

[ShiftZZ]

I have lost/had stolen one of my wheel trims.

Does anyone know where I can buy some 'reasonable priced' trims, wheel size R16..

Ta..

 

[rangi]

Have you tried C A K Tanks?

 

[Trikeman]

I'm also interested in this - I had some cash for Crimbo and may invest in a set for my girl.
:thumb:
There are some really nice ones about, just I'm not too sure they could take the 'bulge' in the wheel - not really 'into' the bulgy, chrome ones like seen on taxis. Some photos fitted would be good too.


Trikeman.

^{_{Subscribers  do not see these advertisements}}

 

[camocam1]

I bought my set from Fiat as bought 2 sets from eBay that didn't fit
NOT cheap I was £75 for the set of 4

 

[Techno]

You can get 4 fiat 16" on eBay from Germany for £65


Edit
Link Removed

 

[GJH]

Search for 16" ducato wheel trims on eBay. Several there similar to the ones which are sold at shows. You do need van ones though not car ones as they are a different shape to take the bulge of the wheel (as mentioned by Trikeman).

^{_{Subscribers  do not see these advertisements}}

 

[Techno]

The genuine Fiat 16" I linked to above are held captive on the wheel by 1 of the five wheel bolts so not easy to pinch unless equiped:thumb:

Actually wrong on that. Held captive by four of the five bolts!

 

[keith]

Got mine here

He sold me one that got lost somewhere between Spain & UK.

 

[Techno]

The genuine Fiat 16" I linked to above are held captive on the wheel by 1 of the five wheel bolts so not easy to pinch unless equiped:thumb:

Actually wrong on that. Held captive by four of the five bolts!

To clarify
One bolt firstly secures the wheel on the hub, you then fit the wheel trim in place and fit the other four bolts. The holes are precisely tapered so the bolts don't trap/crush the plastic but do secure the trim and hold the wheel on.

^{_{Subscribers  do not see these advertisements}}

 

[Techno]

Note the trims are for x250 2007 onwards!

 

[ShiftZZ]

Mine is a 2003...

 

[Techno]

I believe that before the x250 that the tyre valve is in line with a wheel bolt but later falls in between two wheel bolts

^{_{Subscribers  do not see these advertisements}}

 

[TheBig1]

16" commercial van trims £23.98
http://www.ebay.co.uk/itm/SET-4-16-...heels_tyre_Trims_Trims_ET&hash=item5aef98e12e

15" commercial van trims £16.19
Link Removed

neat and tidy but the correct deep dished type. could easily be resprayed any colour you choose with a can

 

[TheBig1]

forgot picture

Broken Link Removed

 

[John and Jo]

To clarify
One bolt firstly secures the wheel on the hub, you then fit the wheel trim in place and fit the other four bolts. The holes are precisely tapered so the bolts don't trap/crush the plastic but do secure the trim and hold the wheel on.

ahhh ..I wondered how they cam off ...thought all 5 held the trim captive. So you can leave 1 bolt on and remove the trim? I ask because it's not that easy to get my pressure gauge in with the trim on. How do you know what one is the non captive bolt?

^{_{Subscribers  do not see these advertisements}}

 

[Techno]

The one clockwise after the valve

 

[John and Jo]

thanks Andy.

 

[dealornodeal]

I advertised mine on ebay yesterday virtually new (delivery meilage only) as I have changed to alloys
Ref Broken Link Removed(181902133245)
I hope the link works £45 + pp

^{_{Subscribers  do not see these advertisements}}

 

[Flamenca]

I bought a set of 16" trims on Amazon. Absolute rubbish. I left them in a skip at Roscoff. They may still be there if you are interested

 

[wanderer]

Always seemed to lose a wheel trim after its been into the garage for servicing ,bought a new set and secure each one with two extra long cable ties

 

[Gromett]

I bought these for my van. £20 for a full set.
Broken Link Removed

Fit nicely. I did lose one 2 years because the tyre fitter damaged the lugs. I now use tie wraps.

^{_{Subscribers  do not see these advertisements}}

 

[Gromett]

Just noticed mine are the same as TheBig1's but his has free carriage so works out cheaper.

 

[Silkcut1105]

ive got a set of stainless wheel trims size 16 for sale 50.00 collection only though from swansea

 

[Viennese]

I bought mine from Motorhome Essentials, he sells at shows, and they are good. Have had lots of stuff from him, including a new carpet to fit the cab. Good bloke!

^{_{Subscribers  do not see these advertisements}}

 

[Minxy]

I bought mine from Motorhome Essentials, he sells at shows, and they are good. Have had lots of stuff from him, including a new carpet to fit the cab. Good bloke!

Just had a shuftie at his site and the seat covers he does are very good - the arm covers at £6 a pair are extremely good value - I was thinking of making some for our camper but at that price I might just splash the cash and save myself a job!!!

http://www.motorhomeessentials.com/arm-rest-covers.html

 

[robnchris]

We lost one of ours, bought a genuine red insert one off e bay £20 delivered, now all fixed with cable ties.

 

[Wickolad]

I'm also interested in this - I had some cash for Crimbo and may invest in a set for my girl.
:thumb:
There are some really nice ones about, just I'm not too sure they could take the 'bulge' in the wheel - not really 'into' the bulgy, chrome ones like seen on taxis. Some photos fitted would be good too.


Trikeman.

I have lost/had stolen one of my wheel trims.

Does anyone know where I can buy some 'reasonable priced' trims, wheel size R16..

Ta..

I have a set of 4 new never fitted genuine Fiat 16" wheel trims for sale. I purchased them a couple of months ago to put on a set of 16" wheels I bought for my MH. Unfortunately wheels didn't fit due to different stud spacing. I sold the wheels on but have the trims still boxed.
These trims are the 2007 onwards and are held in place by 4 of the 5 studs. I don't have a picture fitted but these are the trims £40 collect or plus cost of courier.
Lance

^{_{Subscribers  do not see these advertisements}}