Autotrail Apache 650 SE wiring diagram (1 Viewer)

[olympus]

Hi all,
Does any one have a full wiring diagram for my van ....as the one in the Autotrail handbook is for the standard Apache & not the SE
I specifically need this to find out why the Omnistep powered step isn't auto retracting when the engine is started.
In addition is the feed taken from the alternator D+, off the charging tell tale or from somewhere else??

Many thanks

 

[jonandshell]

Hi Welcome!!!

What year is your Apache? You can find most of the wiring diagrams on the Sargent electrical website.

You will probably find the fault lies with the limit switch actually on the step linkage. Crud gets in the slot and stops it working. A good WDing and working the switch by hand might sort it.

The feed will come from the yellow and red cabled fridge circuit, probably!!!!!

 

[olympus]

Many thanks for this, I'll work through the problem starting with the basics
My van is a 2003 Apache.
Do you have the Sargent web address??

^{_{Subscribers  do not see these advertisements}}

 

[Hellboy]

There you go...

http://sargentshop.co.uk/epages/esh...ories/TechData/"System Schematics"/Auto-Trail

 

[olympus]

Spot on Mr Gaz. many thanks:thumb:

 

[Hellboy]

Spot on Mr Gaz. many thanks:thumb:

No problem...good luck with you fault finding

^{_{Subscribers  do not see these advertisements}}

 

[Baycott]

I had this problem in my Tracker. It turned out to be a fuse in the split relay box which lays beside the vehicle battery.
Hope this helps.
Have a great Christmas and enjoy your new MH

John:thumb: