163phil
Free Member
- Dec 4, 2012
- 283
- 273
- Funster No
- 23,897
- MH
- Coach built
- Exp
- Still only a year after many years camping
I've been fitting a reversing camera to our 2003 Autotrail Apache 600 today, and want to take power to the wireless camera from the rear corner, where there is access to 12V... if I can get in!!
Link Removed
The end panel is hinged on the top, (so must open!), and underneath there are two screws, which only seem to hold the vertical partitioning. Gently levering the front panel shows it to be well and truly held down, but I just can't work out where it's fixed!oh:
I don't want to force it, but can anyone tell me how to undo this accursed little panel?
Thanks in advance for any suggestions:thumb:
Link Removed
The end panel is hinged on the top, (so must open!), and underneath there are two screws, which only seem to hold the vertical partitioning. Gently levering the front panel shows it to be well and truly held down, but I just can't work out where it's fixed!oh:
I don't want to force it, but can anyone tell me how to undo this accursed little panel?
Thanks in advance for any suggestions:thumb: