Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Is it possible to fit cruise control to an '09 Peugeot Boxer ???If so how much do you think it would cost.
Subscribers do not see these advertisements
www.davenewell.co.uk did mine. Top bloke and very professional.
Tel. no. is 01952 587702.
I am not connected to him or his business in any way, just a satisfied customer. :thumb:
It is possible to fit them to any vehicle. Often modern vehicles are particularly easy. I can't help on the Peugeot, but on my Zafira, if it hadn't already had it, you could fit it by buying a new stalk with the buttons on it from the parts department and programming the computer to notice it was there with a mate's Tech2. 40 quid instead of the 300 or so for the "official" option. Basically, the engines are all drive by wire and all the required sensors already feed into the CANBUS and the software is already installed, just needing to be activated.
Subscribers do not see these advertisements
Just use a brick on your pedal
Subscribers do not see these advertisements
You've been around Yosser too long!Just use a brick on your pedal
Is it possible to fit cruise control to an '09 Peugeot Boxer ???If so how much do you think it would cost.
Yes.
£418.86 less 5% funster discount.
Phone us on 01952 587702 during normal working hours to arrange a fitting.
We will give you complimentary tickets to the Ironbridge Gorge Museums so you can go off and enjoy yourselves while the work is done.
D.
Subscribers do not see these advertisements
PS I use a walking stick on motorways BUT don't tell anyone
Subscribers do not see these advertisements
PS I use a walking stick on motorways BUT don't tell anyone
BTW, how much would it be for a '78 Winnebago. Carb+LPG Chevrolet 350 with TH400 auto transmission? Pretty much every safety switch would need adding. It doesn't even have a reverse switch.
Assuming it has a road speed signal £335 with a dash mounted control module.
D.
Subscribers do not see these advertisements
Does a speedo cable count? This thing is lucky not to have magnetoes, a cranking handle and trafficators. The transmission is entirely mechanical except for the kick down switch.
This post made me start nosing into this again, as i still cant understand how a fly bu wire vehicle needs a mechanical cruise control, ive found this, and will investigate further.
"Well, nothing much from the Forum, but I have just had a Cruise Control fitted to the Ducato 2.8JTD. And its a fully drive-by-wire unit that plugs into the ECU and teaches itself how to work!
Its a LiteOn Command AP900 (.) unit which is fully compatible with CAN bus signals, and the half-baked lot from the 244 engine ECU. The command module is a Command CM30, a steering-column mounted stalk switch. Of course, since the vehicle has a manual transmission, there is also a clutch switch.
Its installation was arranged by my local Fiat Commercial service agent (Southern Euro, Dandenong South). The Service Manager said that they have these units after-market fitted to the newer X250s too, so they really are versatile. "
We use a local Fiat dealer at work, so i,m going to tapup one of the "friendly" fitters who did some electronics on a PO Ducato alarm ststem, he knows thw BCU/ECU systems very well, so i,ll see what i can find out.
__________________
Subscribers do not see these advertisements