fiamma awning wont wind in (1 Viewer)

[tommytli]

does any one know where i can get the winding mechanism on the end of the awning from?
when i put the bar on and try to wind in the awning it just spins around:Sad:
ive took it off and its all threaded meaning i had to wind the canopy in with a spanner and strap it up to get home, ive been looking around on the net and can only find the electric ones and they are a bit on the expensive side.

 

[icantremember]

I would try Johns Cross .....see their advert along side this page.....they are Fiamma dealers and members of this forum

 

[tommytli]

cheers ive been looking but cant seem to find it, i think its called a winch slot, i will call them in the morning if i have no look finding it

^{_{Subscribers  do not see these advertisements}}

 

[callumwa]

Can we be sure.......




"THIS IS NOT A WIND UP"..........




sorry....:Blush:

 

[pappajohn]

does the ring pull down onto the dog clutch or wont it pull down.?

 

[tommytli]

does the ring pull down onto the dog clutch or wont it pull down.?

i dont understand what you mean? i put my winding pole into the loop at the end of the awning to wind it back in and it just spins like its rounded off inside and wont bring the canopy back in

^{_{Subscribers  do not see these advertisements}}

 

[rob kinnear]

Hi Try this link for fiamma spares


http://www.fiammastore.com/Spares_Search/_F45_TI_L_Titanium_Size_450_to_550_


Best of luck
Rob

 

[pappajohn]

i dont understand what you mean? i put my winding pole into the loop at the end of the awning to wind it back in and it just spins like its rounded off inside and wont bring the canopy back in

when you place the hook end of the pole in the ring on the awning gearbox you need to pull it down and hold it down as you turn the pole :thumb:

unless the design has changed

 

[tommytli]

when you place the hook end of the pole in the ring on the awning gearbox you need to pull it down and hold it down as you turn the pole :thumb:

unless the design has changed

cheers pappajohn,on mine all that as to be done is just turn it.

^{_{Subscribers  do not see these advertisements}}

 

[tommytli]

Hi Try this link for fiamma spares


http://www.fiammastore.com/Spares_Search/_F45_TI_L_Titanium_Size_450_to_550_


Best of luck
Rob

thanks rob the bit i need is 98655-106.
just sussed out the site and now can purchase it thanks rob

 

[pappajohn]

cheers pappajohn,on mine all that as to be done is just turn it.

Ok...design must have changed since mine was installed :thumb:

if your's wound out, it should wind in.....cant see the gears all striping while its stationary and if it had you would still feel some resistance as the remains of the teeth slipped over each other.

maybe worth a try pulling down......could have been stick down from new and just released itself.
clutching at straws maybe :Blush:

 

[tommytli]

mine is the fiamma zip 450 deluxe does any one know which is the right 1?

^{_{Subscribers  do not see these advertisements}}

 

[tommytli]

Ok...design must have changed since mine was installed :thumb:

if your's wound out, it should wind in.....cant see the gears all striping while its stationary and if it had you would still feel some resistance as the remains of the teeth slipped over each other.

maybe worth a try pulling down......could have been stick down from new and just released itself.
clutching at straws maybe :Blush:

all the gearing has rounded off:Sad: and the worst thing is its just out af warrenty

 

[tommytli]

just ordered from john cross, i should have it this week