Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thanks for the updates! Looking forward to the bench test@Terry it arrived today with no instructions but there's only two plugs
The wiring harness sems to be well made the unit it's self seems to be a good solid build
The control unit is in English
Bench test it tomorrow to see how it works
Bill
Subscribers do not see these advertisements
They do. They have to really as the pump pulses are controlled by the heater to meter the Diesel. Eberspacher / Webasto are the same.On of Thea's would just fit right in to my existing ducting and their is room behind my current heating sytem dose a small lift pump come with it to supply from tank
Bill
Please share pictures etc.Hi funsters I have bought one as well just waiting for a chance to fit it in.Weather permitting I was thinking of putting it under the mo-home. Cheers,Sam.
Bench test went well now fitting itThanks for the updates! Looking forward to the bench test
Subscribers do not see these advertisements
Share some pictures?Bench test went well now fitting it
Bill
Actually Jim they come in Fortune Cookiesinstructions come in Mandarin ..
It's working fine now just a few bit and bobs to sort outShare some pictures?
Subscribers do not see these advertisements
Put my one at back of fire in the wardrob less heat lossHi funsters I have bought one as well just waiting for a chance to fit it in.Weather permitting I was thinking of putting it under the mo-home. Cheers,Sam.
Subscribers do not see these advertisements
Its Ben on all night working very well It take's a good few min to shut down after pressing the stop buttonHi Bill make sure once you turn it on it gets upto working temperature for at least five mins before turning it off and let it go through the motions of it cooling down ....mate sooted his up by turning it on and off as soon as it started to blow hot air ,,,,showi sh his mates,,,it is only a ten minute job to clean it but could have been avoided by letting it run and get to working temperature
Ruing brilliant terry it ran for ages on one fill time for the read nowHi Bill make sure once you turn it on it gets upto working temperature for at least five mins before turning it off and let it go through the motions of it cooling down ....mate sooted his up by turning it on and off as soon as it started to blow hot air ,,,,showing his mates,,,it is only a ten minute job to clean it but could have been avoided by letting it run and get to working temperature
Subscribers do not see these advertisements