Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Subscribers do not see these advertisements
Subscribers do not see these advertisements
This is the same fill point as mine. The cover has broken off though so you will need to take care that it is clean before you fill. For the UK you need this type of adaptor. You will need to buy other adaptors for use in Europe.Gas fill up valve, what adapters do I need
Subscribers do not see these advertisements
Forgot to say, it has a female compression fitting (with non-return valve)on outside of van (looks about 22mm) which goes to tank underneath, not sure what fitting I need to connect.
@pappajohn I think he is after filling his gas tank not getting gas from it. But it is far from clear!
@Justin74 you need to give us more information on your set up and what you are trying to do. Also some photos would help.
Almost, it screws into your existing connector and then you fit the gas pump onto it, as shown by the instructions on the pump. But that is only for the UK. Once you get in the rest of Europe there are three different ones that you will need to buy, depending upon what countries you are going to. Again you screw the relevant one in and then fit the pump nozzle to it.does this connection go on the end of the gas pipe pump at the garage, cheers