Photo4x4
Free Member
I have already spent a bit of time strengthening the bed/settee frames in our U shaped lounge (see this thread), so now I thought that I'd have a go at the end of the slatted part of the double bed that pulls out to form the double bed. This had already cracked slightly so first of all I added a couple of extra screws but I needed something to help take the weight in the middle.
After much thought I have adapted a piece of left over drain pipe! It is light and easy to pack away.
The pictures will explain all (I hope). I have little DIY talent but this was certainly an easy job that took about 10 minutes.
KH
After much thought I have adapted a piece of left over drain pipe! It is light and easy to pack away.
The pictures will explain all (I hope). I have little DIY talent but this was certainly an easy job that took about 10 minutes.
KH