Fuse Size Advice Please! (1 Viewer)

[IanF]

Can I pleased be advised what size of in line fuse should I use for "Leader Jim's Battery Master" device?
Thanks again in advance
Ian

 

[Techno]

No fuses
Eddies device is current limiting with it's own protection and self resetting.

 

[IanF]

Really!-Thank you Techno
Ian

^{_{Subscribers  do not see these advertisements}}

 

[Techno]

@eddievanbitz

 

[eddie]

Yes you can short the Battery Master out and it will simply turn its self off. If your going to extend the wires, good practice would be to fuse the run.

Best to connect at the split charge relay or housing unit though so no need for additional fusing as the wires would already be fused.

 

[IanF]

Thank you Eddievanbitz. I am in the process of installing solar and have in fact extended the wires from the battery master located under my seat to the cab battery. On reflection I should have supplied this information in my original post (so apologies Techno for this oversight).I plan to connect the positive wire directly to the cab battery as I don't have the knowledge to connect to the relay.
Thank you again Eddievan bitz and Techno

^{_{Subscribers  do not see these advertisements}}

 

[Techno]

So fuse size then. The unit only transfers 1.1amp so 3amp is plenty

 

[IanF]

Thank you Techno -I'll try to be much more specific and detailed should I ask for any more advice-which given my past record will be very likely indeed.
Thanks again Ian

 

[eddie]

Thank you Techno -I'll try to be much more specific and detailed should I ask for any more advice-which given my past record will be very likely indeed.
Thanks again Ian

Good point