I've Installed It Under The Hot Seat (the Inverter) (1 Viewer)

Lenny HB

LIFE MEMBER
Oct 18, 2007
52,682
147,576
On the coast in West Sussex
Funster No
658
MH
Hymer B678 DL
Exp
Since 2008 & many years tugging
Finally finished my inverter installation, the boss should now have a heated seat when it's running. Also fitted a changeover relay so that 2 of the sockets in the van & the 2 I fitted in the garage auto switch when mains plugged in.

One quandary I have is if it is best to wire the changeover relay so it is energised from the mains or the inverter.
At the moment I have wired the N.O. contacts to the mains and the relay energised by mains as we rarely use EHU but that may change as we are already booked to spend a month on a site in the Algarve with my mate next winter, so the relay would be constantly energised.
I'm thinking now perhaps should wire the mains to N.C. and have the relay energised by the inverter, only problem with that is if will take about 1 amp at 12v, not a lot but more power out of the leisure batteries not good when off grid.

Inverter under the passenger seat.
P1000391.jpg

My bodge wiring.
P1000389.jpg

This looks a bit better.
P1000390.jpg

A couple of Schuko sockets in the garage for charging the bikes.
P1000393.jpg
 

Techno

LIFE MEMBER
Deceased RIP
Jul 28, 2010
15,475
20,752
Leeds the one up North
Funster No
12,905
MH
Rapido 7090F 3 litre 160
Exp
May 2010
When I used the relay method it was energised on hook up but also the relay had different current ratings on the NO & NC contacts being 30 & 10 respectively so I used the 10 amp NC for the inverter.

EDIT Personally I would keep it the way you have done it.
CA_09061318572565-XL.jpg

CA_10061212571906-XL.jpg
 
Last edited:
OP
OP
Lenny HB

Lenny HB

LIFE MEMBER
Oct 18, 2007
52,682
147,576
On the coast in West Sussex
Funster No
658
MH
Hymer B678 DL
Exp
Since 2008 & many years tugging
Same as I wired mine, all the contacts on mine are 30 amp rated, the most powerful thing I'm ever likely to plug in will be the e-bike charger's, max rating is 1.5 amp but both will probably be on at the same time.

Subscribers  do not see these advertisements

 
Aug 6, 2013
11,941
16,527
Kendal, Cumbria
Funster No
27,352
MH
Le-Voyageur RX958 Pl
Exp
since 1999
I'd to it that way too. If the inverter is left on the sockets will still move over to the EHU supply. The other way round you'd never know whether the sockets were on mains or inverter without checking the inverter switch.
 
OP
OP
Lenny HB

Lenny HB

LIFE MEMBER
Oct 18, 2007
52,682
147,576
On the coast in West Sussex
Funster No
658
MH
Hymer B678 DL
Exp
Since 2008 & many years tugging
I have used this on the inverter output Lenny
Broken Link Removed
I considered an RCD on the output of the inverter, it is a much debated subject as the inverter has an isolated output and I not been able to reach a conclusion if it would work reliably. Decided not to bother in the end, also anything I'm likely to plug in when the inverter is on is double insulated.

Subscribers  do not see these advertisements

 
OP
OP
Lenny HB

Lenny HB

LIFE MEMBER
Oct 18, 2007
52,682
147,576
On the coast in West Sussex
Funster No
658
MH
Hymer B678 DL
Exp
Since 2008 & many years tugging
I'd to it that way too. If the inverter is left on the sockets will still move over to the EHU supply. The other way round you'd never know whether the sockets were on mains or inverter without checking the inverter switch.
I can see your point but wouldn't be much of a problem for us, only used a EHU for one night in the last 4 years, normally not a EHU within 20 miles of where we camp.:)
 

Techno

LIFE MEMBER
Deceased RIP
Jul 28, 2010
15,475
20,752
Leeds the one up North
Funster No
12,905
MH
Rapido 7090F 3 litre 160
Exp
May 2010
I've been trying to find another UPS inverter like the one I was lucky to get for about £216 from German ebay.
The only one I can find via google is €699 plus shipping :party2:
Broken Link Removed
 
OP
OP
Lenny HB

Lenny HB

LIFE MEMBER
Oct 18, 2007
52,682
147,576
On the coast in West Sussex
Funster No
658
MH
Hymer B678 DL
Exp
Since 2008 & many years tugging
I've been trying to find another UPS inverter like the one I was lucky to get for about £216 from German ebay.
The only one I can find via google is €699 plus shipping :party2:
Broken Link Removed
Nice but Ouch!

Subscribers  do not see these advertisements

 

Techno

LIFE MEMBER
Deceased RIP
Jul 28, 2010
15,475
20,752
Leeds the one up North
Funster No
12,905
MH
Rapido 7090F 3 litre 160
Exp
May 2010
Anyway you've done a great job (y) and clearly know what you are doing.
Edit and thanks for sharing :cool:
 
Last edited:

Judge Mental

Funster
Deceased RIP
Sep 2, 2009
6,650
5,883
Sarth London
Funster No
8,272
MH
Possl 636 FR panel van
Exp
1994 and beyond...
I have a 300 watt pure sine wave inverter that I've never used....coming back from Spain this week though I would try it. but twin banner batterys under the passenger seat has no headroom to get to terminals to connect crocodile clips? :(

how can I connect it please

Subscribers  do not see these advertisements

 

Techno

LIFE MEMBER
Deceased RIP
Jul 28, 2010
15,475
20,752
Leeds the one up North
Funster No
12,905
MH
Rapido 7090F 3 litre 160
Exp
May 2010
I would hard wire off the terminal posts to an external connector for easy access
This is know as an Anderson connector
CA_06291415131501-L.jpg
 

Techno

LIFE MEMBER
Deceased RIP
Jul 28, 2010
15,475
20,752
Leeds the one up North
Funster No
12,905
MH
Rapido 7090F 3 litre 160
Exp
May 2010
As you can see the situation and I can't then you are in a better position to decide but I would say yes unless you're Dynamo :p

Subscribers  do not see these advertisements

 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Funsters who are viewing this thread

Back
Top