38mm I.D. Washer Needed (1 Viewer)

[Dawn B]

to repair our hab door catch

 

[DBK]

They are expensive! Broken Link Removed

 

[Dawn B]

They are expensive! Broken Link Removed

That's why we were hoping someone had one in a drawer somewhere

^{_{Subscribers  do not see these advertisements}}

 

[Deleted member 29692]

Do they have to be steel? If you could get away with using plastic or fibre then 38mm is a standard plumbing size (inch and a half). Should be able to get something for pennies.

 

[Badknee]

They are expensive! Broken Link Removed

 

[Dawn B]

Do they have to be steel? If you could get away with using plastic or fibre then 38mm is a standard plumbing size (inch and a half). Should be able to get something for pennies.

Yes it does, the wind slammed the hab door against the stop and punched the catch through

^{_{Subscribers  do not see these advertisements}}

 

[rb62]

Agricultural dealer,if no ones come up with one by tomorrow
morning i'll go in and have a look where I used to work.
Still know where stuff is five years after leaving!

 

[chaser]

Have you tried a proper ironmongery or even b and q surely someone must have them at right price.
£12 for 4 washers , somebody's having a laugh there

 

[Dawn B]

Have you tried a proper ironmongery or even b and q surely someone must have them at right price.
£12 for 4 washers , somebody's having a laugh there

Tried local ironmongery and B & Q are 20 miles away

^{_{Subscribers  do not see these advertisements}}

 

[Dawn B]

@rb62

 

[chaser]

Just been having a look 38s easy enough it's the 60 that's harder

 

[Mike B]

It's only the 38mm internal dia. that is critical the outside dia can be anything, although 45 - 55 mm would look better.

^{_{Subscribers  do not see these advertisements}}

 

[gus-lopez]

As rb62 said. Agricultural supplier/ mole valley farmers in Devon/ any tractor place really.
Any one with a 38mm starrett hole cutter could knock one up from a bit of 3mm in no time,

 

[andy63]

Hi mike dawn. Just had a look. Got a steel washer 50mm o/d. I can make the internal whtever you need. Ie 38mm.
It's just a little under 3mm thick . Let me know and I'll post it in morning if you want... I'll clean it up of course lol
Ta andy

 

[tinkering]

I could make you one out of alli plate Mike how thick

What would the out side dia be?

Whoops beaten to it

^{_{Subscribers  do not see these advertisements}}

 

[Dawn B]

Hi mike dawn. Just had a look. Got a steel washer 50mm o/d. I can make the internal whtever you need. Ie 38mm.
It's just a little under 3mm thick . Let me know and I'll post it in morning if you want... I'll clean it up of course lol
Ta andy
View attachment 57207

Thanks Andy 38mm is perfect, will PM address

 

[Dawn B]

@tinkering

 

[andy63]

Thanks Andy 38mm is perfect, will PM address

Ok ill sort that out and post in morning.
Ta andy

^{_{Subscribers  do not see these advertisements}}

 

[bertiebasset]

Wot à wonderful helpful lot

 

[DBK]

And they all lived happily ever after.

Don't you just love a happy ending?

 

[tinkering]

I'm not























I was going to ask Dawn to blow Tootles a kiss or two

^{_{Subscribers  do not see these advertisements}}

 

[Deleted34567]

Your sorted.
Could turn you one on the lathe/milling machine whatever dia/hole/thickness you needed, from whatever material you liked.
Anyone else stuck for bits & pieces we can generally make them up.

What a great forum this is.