- Nov 6, 2013
- 3,201
- 227,264
- Funster No
- 28,906
- MH
- Hymer B574DL
- Exp
- Since 2011 (tugger for 20 before that)
I was told yesterday that my reversing light wasn't working.
I had a look today armed with a new bulb but am now at a loss.
With the ignition on and no bulb in I have, according to my multimeter, 12v at the bulb socket. However, if I put the new bulb in (tested ok with the meter) it still doesn't work and the voltage disappears.
Any advice would be most welcome
John
I had a look today armed with a new bulb but am now at a loss.
With the ignition on and no bulb in I have, according to my multimeter, 12v at the bulb socket. However, if I put the new bulb in (tested ok with the meter) it still doesn't work and the voltage disappears.
Any advice would be most welcome
John