For sale Water Filler Hose Bung

£14.00
Status
17 members are watching this ad

Ad details

3D printed Water Filler Bung . Has provision for garden hose Hozelock connection in the centre. Also provision to use 12volt whale subby pump in the second hole. (Except on the 55mm model). The subby pump hole is 12mm for using with 10mm subby pump and pipe. While filling with the Hozelock connection, the other hole acts as a vent and visa versa. Allows filling without the hose dropping out as soon as you turn the water on. Fits the three pronged type filler necks with cap internal diameter of 64mm, 61mm and 55mm. Please state which size you need when ordering. Help with where to measure is shown in two of the pictures. Fold a piece of paper to either 64,61 or 55mm wide and offer up to your filler neck. This is easier than trying to get a tape measure in.
Cost is £14 + p&p of £3.20. making a total of £17.20

chrisatheathpark@yahoo.com
  • 7873BBB1-1627-43A6-964C-817443492ABF.jpeg
    7873BBB1-1627-43A6-964C-817443492ABF.jpeg
    940.9 KB · Views: 118
  • 11A25CCC-0129-4939-A3EC-B7F515B18297.jpeg
    11A25CCC-0129-4939-A3EC-B7F515B18297.jpeg
    375.8 KB · Views: 112
  • 0E08866E-AC96-43E9-8FB0-528C2E6C300B.jpeg
    0E08866E-AC96-43E9-8FB0-528C2E6C300B.jpeg
    378.6 KB · Views: 9,354
  • B9DFBF63-5E8F-4AB1-8709-E418C4B95442.jpeg
    B9DFBF63-5E8F-4AB1-8709-E418C4B95442.jpeg
    645.4 KB · Views: 15
  • D60BF994-4949-4B08-BC25-E8EEF73BF756.jpeg
    D60BF994-4949-4B08-BC25-E8EEF73BF756.jpeg
    285.6 KB · Views: 16
  • 77F849AA-7C5F-4257-A3EC-DEB91813B962.jpeg
    77F849AA-7C5F-4257-A3EC-DEB91813B962.jpeg
    289.3 KB · Views: 5

Location

Latest questions

Hi Paul, Just been and measured mine and it is 64mm. Currently using one of these: 1626281136938.png 1626281136938.png but find it has either expanded or my water filler hole has shrunk and last time I fitted it I really struggled to remove it
. Do you make that (64mm) size without the breather/subby hole in it? if so I will order one.
Reactions: PaulandChrissy
PaulandChrissy
PaulandChrissy
Hi bertiebasset
I can print you one without the breather. Wouldn’t take long to remove the breather in the CAD program. If you would like one, send me your address and I will make one for. I assume you do have 3 lugs On the back.
Payment is £17.20 incl p&p by bank transfer to Halifax. 11-03-79 acc 10063861. Paul Lawrence. Please put ref 64mmNoHole.



Cheers Paul and Chrissy
Hi Paul could I order one of these filler cap/hose connector please.

I have ordered before from you and bought the injector anti drip tray and water filler funnel and both items are really great and work well.

Could I pay by card please as we are currently away on site with no bank logging in facility?

Many thanks
Russ Beavers
7 Coniston Close
York.
R
RussMag
Hi Paul, I can do PayPal payments while away but how do I do this, can I select off your items?
Thanks
Russ
PaulandChrissy
PaulandChrissy
Hi Russ
sending you a PM
R
RussMag
Hi Paul, yes this was very helpful and my filler cap is the same and size as yours, I will get a payment sent to you on PayPal to order a filler bung from you as advised.
Many thanks
Russ
Hope this is not a daft question - how do you know when the tank is full and to stop filling
PaulandChrissy
PaulandChrissy
No, its not sealed, It’s got an extra hole for filling with a whale stubby pump that doubles up as a breather/overflow outlet.

👍PaulandChrissy
Shadow81
Shadow81
Can I order one then please?
PaulandChrissy
PaulandChrissy
Sending you a PM
Hi Paul, is it easy to modify this model to increase the grip area? Either make the cap taller to access the knurled outside or fit extra wings. This would make it easier for those less dexterous to fit and remove
3 members found this helpful.
Reactions: PaulandChrissy
Scotch mist
Scotch mist
thanks Paul , I received my filler it’s good quality & fits a treat with a fast turnaround, highly recommended, kind regards Kenny d
bertiebasset
bertiebasset
Hi Paul, received my bung today and I must say you have excelled. It fits a treat,, is firm and the handle area makes it easy to put on/take off. Thanks.
PaulandChrissy
PaulandChrissy
Excellent. Glad you like it. I did try to design it tough and easy to use. I have tough quality control watching over me. (Chrissy the wife) 😉👍
Direct Motorhome Services
Diesel fired air or water heating systems for Motorhomes,
West Country Motorhomes
Rhino Installs

Ad information

Posted by
PaulandChrissy
Feedback score
+20 /0 /-0
Category
Motorhome Accessories
Views
796
Watchers
17
Questions
4
Last update

More from PaulandChrissy

More in Motorhome Accessories

Top