Gaslow and Gassit LPG Caps can be a real pain to remove as they get older as the plastic swells. There’s no real way of gripping them firmly to pull them off after turning them. I have designed and 3D Printed a replacement sturdier version that has a slightly smaller diameter to give better clearance and prevent binding. I have also given the gripping area a slight undercut to give you better purchase when pulling it off. You will need to reuse your existing spring unit inside the original cap, but that is easy to do. Instructions are supplied just in case your unsure how to do it. (Keep your old cap. You never know when it might come in handy. Just pop it in your door pocket for safe keeping.)
I can make them in Black or White. With two types of grip bar. FLUSH as used on the original and GRIPPER, an extended bar for those who struggle removing caps. OR, if you fancy something a little special, I make one with LPG pressed into it. This does however mean you will need the special LPG key to remove the cap. (at £8).
£15 + P&P £3.75 Small Parcel
I can make them in Black or White. With two types of grip bar. FLUSH as used on the original and GRIPPER, an extended bar for those who struggle removing caps. OR, if you fancy something a little special, I make one with LPG pressed into it. This does however mean you will need the special LPG key to remove the cap. (at £8).
£15 + P&P £3.75 Small Parcel
