Removing gas units.

Discussion in 'Heating and Air-Conditioning' started by bobbybear, Nov 14, 2012.

  1. bobbybear

    bobbybear Read Only Funster

    Joined:
    Nov 14, 2012
    Messages:
    5
    Likes Received:
    0
    Location:
    Kent
    I need to remove my fridge and truma heater but have been defeated so far by gas unions which are really tight. They do undo the normal way i take it??, not like the cylinder connections. THe fridge was never installed plumb ( CI !!) , and the heater ignitor wiring is shorting out. My previous van lasted 32 years and everything still worked , It was built in Great Britain.
     
    Last edited: Nov 14, 2012
  2. scotjimland

    scotjimland Funster Life Member

    Joined:
    Jul 25, 2007
    Messages:
    28,934
    Likes Received:
    25,574
    Location:
    .
    Yes, they undo in the normal way.. they may have Loktight on the threads..

    persevere..
     
  3. jonandshell

    jonandshell Funster

    Joined:
    Dec 12, 2010
    Messages:
    5,261
    Likes Received:
    7,881
    Location:
    West Norfolk
    Gas bottle connections undo clockwise, flair nuts on gas pipes undo anticlockwise, just like nuts and bolts!:thumb:
     
Loading...

Share This Page