Positioning Eurolite Headlamp beam benders

Discussion in 'Continental Touring' started by JeanLuc, Jul 9, 2009.

  1. JeanLuc

    JeanLuc Funster

    Joined:
    Nov 17, 2008
    Messages:
    2,782
    Likes Received:
    1,859
    Location:
    Warwickshire
    Being too tight to buy new Eurolites each time we go abroad, I re-use them. I find there is enough 'tack' left in the adhesive to make them usable provided they are secured with a couple of strips of clear tape as well.

    Now the problem. I have lost the leaflet showing correct positioning and cannot remember where I fixed them last time. So I e-mailed the suppliers with a photo of the hymer's lights, asking them where to place the circle. Guess what? They replied that I should use diagram 8 on the leaflet!!!

    So the point is, does anyone have a Eurolight leaflet that they could have a quick look at and tell me where diagram 8 shows the circular mask please? Right hand lamp in the picture below. (We're off this weekend)

    Many thanks

    Philip
     
  2. SIFTA SAM

    SIFTA SAM Read Only Funster

    Joined:
    Jan 27, 2009
    Messages:
    454
    Likes Received:
    452
    Location:
    Leyland Lancs
    Hope this helps!
     
  3. pegasus

    pegasus Read Only Funster

    Joined:
    Dec 16, 2009
    Messages:
    62
    Likes Received:
    2
    Location:
    Bristol
    Can I also have this please?

    Kind regards
    Christos
     
  4. alan'n'bev

    alan'n'bev Read Only Funster

    Joined:
    Apr 23, 2010
    Messages:
    20
    Likes Received:
    0
    beam beanders

    will i need these for my trip to france:Doh::Eeek:
     

Share This Page