Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
it should fix to the exsisting one ye we have one that i use http://www.gasure.co.uk/ a local guy to us helpfull too steve is his name
Subscribers do not see these advertisements
Subscribers do not see these advertisements
Subscribers do not see these advertisements
Yes an acme to claw gun no problem, but acme to the new euronozzle will be, as far as I know you can't get one at the mo.
Olley
Subscribers do not see these advertisements
Hi Bob, the only answer I can see at the moment is to thread the inside of the acme to bayonet, and then you could screw the euronozzel into that, and then screw both onto your tank.
I am going to have a go with mine when I get the chance.
Olley
If I had access to a lathe and some brass I would make one without the non return valve as I think the valve is a waste of time if its going to be removed after filling, plus there is always the chance of a freeze burn from the escaping gas.
Doug...
Hi Doug, picking my old lathe up tomorrow, hopefully Uncle found it for me about 35 years ago on a building site, he was the architect in charge of the rebuilding, I swopped it for a cement mixer after about ten years with my father when we built our house, dad died in 96 and it got passed back to uncle, he's since died and his widow has said I can have it. So well chuffed.
Olley
Subscribers do not see these advertisements