KT4 panel (1 Viewer)

[con-tiki]

I have a KT4 distribution panel which has a row of fuses on. All the writing has rubbed off, so I cannot tell which fuse is for what..I cannot find any info on it. The swift owners handbook illustrates a KT9M . I also have a separate Zig water level gauge which appears not to work.

Would changing the distrib panel be an option, and what panel would be suitable

Shirl

 

[Terry]

Hi why not just pull out a fuse and see what does not work /works :thumb: then make a note of which fuse controls what The water gauge may never have worked /wired up from new-they are a waste of time A lot cheaper than £100 plus for a new panel
terry

 

[con-tiki]

Link Removedthought I would add a pic .If anyone has one like mine....

^{_{Subscribers  do not see these advertisements}}

 

[pappajohn]

new panel may not help.

if its on a multi connector plug it may not be the same configuration as the new panels plug.

in other wards, you still need to know what fuse controls what circuit.

as terry said, just pull one fuse at a time and see what doesnt work...or turn everything on and pull fuses looking for what goes off.

 

[Geo]

This guy may help he has a phone number and contacts page on his site and advise is free
Looks like an ex Plug in engineer:thumb:
Geo