Help with leveling please (1 Viewer)

[Goldenoldies]

I have been through search thread and quite a few manual pages(may have misssed it). I am looking for info to level a tag axle. Have just read a review from Out and About and the say to be sure to carry some scaffold boards, surely this will have a big bearing on your loading.There must be a easier way?

 

[old-mo]

2 Fiammi ramps or similar and a couple of square feet by 2 - 3inch thick blocks.. :thumb: blocks...

 

[PaulyP]

I use ramps for the front wheels if needed. I also have a set of fiamma axle stands which i can use for steadying i have 2 inch wooded blocks for them to stand on to spread the load. I dont lift with the stands, just stops it rocking about. Not too much extra weight.

^{_{Subscribers  do not see these advertisements}}

 

[Forestboy]

Its not difficult I just carry 3 Fiamma yellow ramps covers all eventualities.

 

[Encantador]

Mine is a Swift Tag and seems to always need the front lifting.

Have a pair of Milenco Quattros and they do fine, often need to be right on the top though, so wouldn`t want anything smaller.

Steve

 

[pappajohn]

turn round and raise the front wheels instead

^{_{Subscribers  do not see these advertisements}}

 

[aba]

found these on the net but am sure there is someone in the uk doing a similar item
just build up to the required height and drive on although you would probably need a couple of 12 packs.

http://www.level-trek.com/product.php

 

[pappajohn]

found these on the net but am sure there is someone in the uk doing a similar item
just build up to the required height and drive on although you would probably need a couple of 12 packs.

http://www.level-trek.com/product.php

maybe not the same make but available at most of the shows :thumb: