Gaslow question

Discussion in 'Tech/Mech General' started by Nigel&Debbie, Feb 21, 2015.

  1. Nigel&Debbie

    Nigel&Debbie Read Only Funster

    Joined:
    Nov 20, 2012
    Messages:
    287
    Likes Received:
    206
    Location:
    Full Timer
    I have a 2 x gaslow large bottle system with a fitted fill point in side of vehicle.

    I need to remove bottles to insulate back of storage area. The bottles are both nearly full.

    Do the bottles have a non return type valve on the filler side of things, so that when I undo the connecting hoses I wont lose all my gas?

    Thanks in advance for the replies
     
  2. Techno

    Techno Funster Life Member

    Joined:
    Jul 28, 2010
    Messages:
    14,138
    Likes Received:
    15,084
    Location:
    Leeds the one up North
    Yes they do. You might lose a little residual from the fill pipe itself
     
    • Like Like x 2
  3. Lenny HB

    Lenny HB Funster

    Joined:
    Oct 18, 2007
    Messages:
    6,057
    Likes Received:
    6,059
    Location:
    West Sussex
    Yes the bottles have a non return valve and so does the filler inlet. Be prepared for a release of gas when you unscrew the hose it can hold a fair bit of gas at high pressure.
     
    • Like Like x 1
  4. Techno

    Techno Funster Life Member

    Joined:
    Jul 28, 2010
    Messages:
    14,138
    Likes Received:
    15,084
    Location:
    Leeds the one up North
    :LOL:
     
    • Like Like x 1
  5. pappajohn

    pappajohn Funster Life Member

    Joined:
    Aug 26, 2007
    Messages:
    29,940
    Likes Received:
    17,608
    Location:
    YO11 2BD
    A bit like this forum then.... :rofl:
     
    • Like Like x 3
  6. Nigel&Debbie

    Nigel&Debbie Read Only Funster

    Joined:
    Nov 20, 2012
    Messages:
    287
    Likes Received:
    206
    Location:
    Full Timer
    Thanks for all the replies. Much appriciated.
     
  7. flatpackchicken

    flatpackchicken Funster Life Member

    Joined:
    Jun 27, 2010
    Messages:
    926
    Likes Received:
    897
    Location:
    BICESTER OXFORDSHIRE
    Don't forget to keep your mouth shut when unscrewing valve's and wear eye protection as well or at least keep your eyes shut ????????????????? as gas will come out at fairly high pressure maybe Regards Garry Flatpackchicken
     
    • Like Like x 1
Loading...

Share This Page